Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
Easy-Lift Kit
TRC219LK
To be used with standard height suspension only, the SuperPro Easy-Lift kit will lift the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 front strut spacers, 2 rear raising blocks, 4 longer U-bolts and, 2 rear brake line spacers to keep the brake lines safe and secure.
SuperPro Roll Control Easy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Pick-Up and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
Everything that is required has been supplied in each kit, including comprehensive fitting instructions to ensure the right outcome every time.
Kit contains 2 front strut spacers, 2 rear raising blocks, 4 longer U-bolts and, 2 rear brake line spacers to keep the brake lines safe and secure.
SuperPro Roll Control Easy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Pick-Up and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
Everything that is required has been supplied in each kit, including comprehensive fitting instructions to ensure the right outcome every time.
Quantity required: 1
Kit Includes: 2 x Spacers, 2 x Spacer Blocks, 4 x U-Bolts
Fitment Difficulty:
Fitting Time: 2hrs 30mins
33mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar
RC0081FZ-33
SuperPro Roll Control Front Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
Control Arm Lower Camber Bolt Kit
TRC0031
Complete set of replacement Camber Bolts
Quantity required: 1
Kit Includes: 4 x Bolts, 4 x Nuts, 4 x Washers
Fitment Difficulty:
Fitting Time: 2hrs
4
Control Arm Lower Complete Assembly Kit
Offset for Lifted Vehicles
TRC476
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction
0.6 Degrees of Camber Adjustment
Alignment Correction
Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins.
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
0.6 Degrees of Camber Adjustment
Alignment Correction
Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins.
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
- Camber increase version is ideally suited to a lifted vehicle
Quantity required: 1
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Pins
Fitment Difficulty:
Fitting Time: 1hr 30mins
5
Control Arm Lower-Inner Front Bush Kit
Offset for Lifted Vehicles
SPF5028XK
Alignment Correction
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
6
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment
SPF5027K
Standard replacement
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
7
Control Arm Upper Complete Assembly
Standard Alignment
TRC477
Standard replacement for non-lifted vehicles. Comes complete with standard alignment SuperPro bushes and standard ball joints.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 1hr 30mins
Wheel-alignment required after fitment
8
Control Arm Upper-Inner Bush Kit
Alignment Correction
SPF3230K
Alignment Correction. Camber Adjustable by 0.5 to 1 Degree.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non-tyre-wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non-tyre-wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 4hrs
Shock Absorber Lower Bush Kit
SPF2348PK
Will not fit Koni & EFS Shocks. Utilises superior SuperPro Hybrid material for massive increase in durability in all applications.
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
18mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0081RZ-18
The Hilux does not come fitted with a rear anti-roll bar as standard and SuperPro have managed to expertly engineer a retro-fit bar which comes supplied with everything you need to fit it.
The resistance to the fitment of rear anti-roll bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement anti-roll bar and link package is designed correctly, it can be fitted with minimal or no loss of articulation.
Upgrading to SuperPro's Roll Control Anti-Roll Bars will:
We highly recommend fitting this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package.
The resistance to the fitment of rear anti-roll bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement anti-roll bar and link package is designed correctly, it can be fitted with minimal or no loss of articulation.
Upgrading to SuperPro's Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
We highly recommend fitting this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package.
Quantity required: 1
Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit
Fitment Difficulty:
Fitting Time: 1hr 30mins
Brake Line Spacer Kit
SPF4855K
When raising the ride height of your Hilux, the rear brake lines can become stressed due to the extra reach which can lead to damage and even failure. You can fit our Brake Line Spacer Kit which extends the reach of the rear brake lines to account for the extra height, removes stress from the lines and, keeps your vehicle safe and secure.
Quantity required: 1
Kit Includes: 4 x Steel Tubes, 4 x Bolts, 8 x Washer(s) - used for Steel and / or Polyurethane
Fitting Time: 30mins
Fixed Pin Protection Cap
SPF4848K
To be used with aftermarket Greaseable Fixed Pins
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Greasable Pin and Bush Kit - Front Eye
SPF4456K
Spring Front Eye Bush Kit
SPF2670K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Spring Rear Eye Bush Kit
SPF2671K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Spring Shackle Upper Bush Kit
SPF2672K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins