Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
No Increase in Noise, Vibration or Harshness
Suspension Enhancement Lift Kit
ISUZ-005R
Designed to lift the vehicle 40mm (depending on load) and provide the ultimate in handling and control, both on and off road.
0-300kg constant load.
Kit includes: 2 x Bilstein ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Bilstein dampers.
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
0-300kg constant load.
Kit includes: 2 x Bilstein ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Bilstein dampers.
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimised vehicle control
- Constant damping power under any load
- 3 year / 60,000km warranty
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
Quantity required: 1
SuperPro Easy-Lift Kit
TRC185LK
This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Hand Brake Bracket Mount Extension Kit
Quantity required: 1
Kit Includes: 2 x Spacers, 2 x Spacer Blocks, 4 x U-Bolts
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Wheel-alignment required after fitment
Front Control Arm & Rear Leaf Spring Set
KIT5352K
Kit Includes: SPF4032Kx1, SPF4031Kx1, SPF2670Kx1, SPF2231-4Kx1, SPF4040Kx1
Quantity required: 1
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
Control Arm Upper-Inner Kit
SPF4031K
Kit contains front & rear position bushings
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Fitment Difficulty:
Sway Bar Mount To Chassis Bush
SPF4030-29K
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
Leaf Spring Bush Kit
KIT0185K
Kit Includes: SPF2670Kx1, SPF2231-4Kx1, SPF4040Kx1
Quantity required: 1
Greasable Shackle and Bush Kit
KIT0185SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings. Kit includes FSP-001Kx1, FSK-001Kx1, SPF2670Kx1, SPF2231-4Kx1, SPF4040Kx1
Quantity required: 1
Greasable Shackle and Bush Kit - Rear of Spring
KIT0185RSK
Contains Greasable Shackles and SuperPro Bushings. Kit includes: FSK-001Kx1, SPF2231-4Kx1, SPF4040Kx1
Quantity required: 1
Spring Front Eye Bush Kit
SPF2670K
Spring Rear Eye Bush Kit
SPF2231-4K
Spring Rear Upper Shackle Bush Kit
SPF4040K
Rear Shock Absorber Lower Mount Bushes
SPF2178-16K
Rear Shock Absorber Upper Mount Bushes
SPF2178-16K20mm Heavy-Duty 3-Position Blade-Adjustable Sway Bar
RC0031RZ-20
Cannot be used with Airbags fitted in the rear
Quantity required: 1
Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit, 4 x Polyurethane Bushes, 2 x Brackets, 2 x Links, 4 x Brackets, 2 x U-Bolts
Fitment Difficulty:
Fitting Time: 2hrs
Hand Brake Cable Extension Kit
SPF4801K
Required when fitting lifted, high load carrying leaf spring packs.
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 2 x Bolts, 2 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 30mins