Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
No Increase in Noise, Vibration or Harshness
Control Arm Upper-Inner Bush Kit
SPF2014-95K
suits 4WD Vehicles only
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Kit Includes: 4 x Steel Tubes, 4 x Sleeves, 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 4hrs
Control Arm Upper-Inner Bush Kit
SPF2014K
suits 4WD Vehicles only
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Kit Includes: 4 x Steel Tubes, 4 x Sleeves, 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 4hrs
Steering Rack & Pinion Mount Bush Kit
SPF2484K
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 5 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs
Sway Bar Link Kit - Heavy Duty Adjustable
TRC1085
10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 140 mm - Maximum Length 185 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Sway Bar Mount Bush Kit
SPF0971-26K
available Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 45mins
Sway Bar Mount Bush Kit
SPF0971-27Kavailable Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 45mins
18mm Heavy Duty 3 Position Blade Adjustable Sway Bar
RC0027RZ-18
SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit
Fitment Difficulty:
Fitting Time: 1hr 30mins
Greasable Pin and Bush Kit - Front Eye
SPF4460K
Greasable Shackle and Bush Kit
KIT0070SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
Leaf Spring Bush Kit - Heavy-Duty Use
KIT0070HK
Kit contains: 1 x SPF0972HK, 1 x SPF2231-8HK
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Leaf Spring Bush Kit - Standard Use
KIT0070K
Kit contains: 1 x SPF0972K, 1 x SPF2231-8K
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Shock Absorber Upper & Lower Bush Kit
SPF2178-16K
A=16mm B=24.5mm C=24mm D=36mm E=30mm
Double Tapered Bushing
Double Tapered Bushing
Quantity required: 2
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
Spring Front Eye Bush Kit
SPF0972HK
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Spring Front Eye Bush Kit
SPF0972K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Spring Rear Bush Kit All
SPF2231-8K
Quantity required: 1
Kit Includes: 8 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins