My steering is soo much sharper!
Front and Rear Suspension Bush Kit (For normal road use)
KIT5360KQuantity required: 1
Front Control Arm Bush Kit
Control Arm Lower Complete Alloy Assembly - DuroBall
ALOY0018KThese enhancements are the optimal settings over standard to produce a better handling vehicle.
SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.
The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.
The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more
Quantity required: 1
Kit Includes: 2 x Arms


Wheel-alignment required after fitment
Engine Mount Bush Kit
TRC2001Contains Upper, Lower and Pendulum Mounts. Higher Duro Polyelast.
Quantity required: 1


Control Arm Lower Front Bush Kit
SPF4175KQuantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Lower Rear Bush Kit
Standard Alignment
SPF4176KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Steering-Pull Correction Kit
SPF4177KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Performance Alignment Correction Kit
SPF4178KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
24mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link Kit
RC0033FZ-24KITQuantity required: 1
Kit Includes: 1 x Sway Bar, 2 x Polyurethane Bushes, 2 x LINKS


Wheel-alignment required after fitment
24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
RC0033FZ-24Quantity required: 1
Kit Includes: 1 x


Wheel-alignment required after fitment
Sway Bar Link Kit - Heavy Duty Adjustable
TRC4301Quantity required: 1
Kit Includes: 2 x Links


Rear Suspension Bush Kit (For normal road use)
KIT5360RKQuantity required: 1
Control Arm Lower-Inner Front Bush Kit
SPF3350KQuantity required: 1
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 2 x Polyurethane Bushes


Wheel-alignment required after fitment
Control Arm Lower-Front Outer Bush Kit
SPF4180KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Control Arm Lower-Inner Bush Kit
Standard and Fast Road
SPF4181KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
High-Performance Version
SPF4181-90KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes


Control Arm Lower-Outer Bush Kit
SPF4426KQuantity required: 1
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes


Wheel-alignment required after fitment
Control Arm Upper-Inner Bush Kit
SPF4193KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes


Wheel-alignment required after fitment
Control Arm Upper-Outer Bush Kit
SPF4194KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes


Wheel-alignment required after fitment
Trailing Arm Bush Kit
SPF4195KQuantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
22mm Heavy Duty 2 Position Blade Adjustable Sway Bar & Link Kit
RC0033RZ-22KITQuantity required: 1
Kit Includes: 1 x Sway Bar, 2 x Polyurethane Bushes, 2 x Links


22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
RC0033RZ-22Quantity required: 1
Kit Includes: 1 x


Wheel-alignment required after fitment
Sway Bar Link Kit
TRC4300Quantity required: 1
Kit Includes: 2 x Links

