Audi A3 MK3 8V1 3-Door Hatchback 1.4 TFSI Suspension Upgrades

1

SuperPro Handling Package

This kit is designed to offer a tighter, more communicative and involving driving experience without compromising ride quality and noise levels. This package of components can be used in conjunction with your car's standard springs and dampers or will be an excellent complement to an upgrade or conversion.

Quantity required: 1

2

Front and Rear Suspension Bush Kit (For normal road use)

KIT5360K

Kit includes; 1xSPF4175K, 1xSPF4176K, 1xSPF3348K, 1xSPF3349K,1XSPF4180K, 1xSPF4181K, 1xSPF3350K, 1xSPF3351K, 1xSPF4195K

Quantity required: 1

3

Front Control Arm Bush Kit

A

Standard Alignment

KIT5360CAK

Kit includes: 1xSPF4175K, 1xSPF4176K

Quantity required: 1

B

Caster Increase

KIT5360CADJK

Kit includes: 1xSPF4175K, 1xSPF4178K

Quantity required: 1

4

Complete Lower Control Arm Kit

A

Steel Standard Alignment

TRC1070-MOD

Comes complete with standard alignment SuperPro bushes and ball joints as a simple and quick repair/upgrade solution.

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

B

Lightweight Alloy Adjustable with DuroBall

ALOY0018K

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.

These enhancements are the optimal settings over standard to produce a better handling vehicle.

SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.

The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.

The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Quantity required: 1

Kit Includes: 2 x Arms

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

5

Control Arm Lower Front Bush Kit

SPF4175K

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

6

Control Arm Lower Rear Bush Kit

A

Standard Alignment

SPF4176K

Standard Replacement

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

B

Steering-Pull Correction Kit

SPF4177K

Single Offset for alignment correction on one side of the vehicle

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

C

Performance Alignment Correction Kit

SPF4178K

Double Offset for alignment correction on both sides of the vehicle

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

7

Extra Camber Strut Mounts

TRC5000

Made from cast aluminium and featuring SuperPro's unique polyurethane to keep it securely but comfortably located, this part gives 1 degree of extra camber adjustment using the top-mount. It's been designed to work with OE suspension (including damptronic OE dampers) and aftermarket coilovers.

Quantity required: 1

Kit Includes: 2 x Mounts

8

24mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar and Link Kit

RC0033FZ-24KIT

Factory fit. Includes bushings and 3 stage anti-corrosion coating and Link Kit

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes, 2 x Links

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

9

24mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

RC0033FZ-24

Factory fit. Includes bushings and 3 stage anti-corrosion coating

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

10

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC4301

12mm Ball Joint Adjustable Link, Minimum Length 320 mm. Maximum Length 365 mm. OE length 355mm

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

11

Rear Suspension Bush Kit (For normal road use)

KIT5360RK

Kit includes; 1xSPF3348K, 1xSPF3349K,1XSPF4180K, 1xSPF4181K, 1xSPF3350K, 1xSPF3351K, 1xSPF4195K

Quantity required: 1

12

Control Arm Lower-Inner Front Bush Kit

SPF3350K

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

13

Control Arm Lower-Front Outer Bush Kit

SPF4180K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

14

Control Arm Lower-Inner Bush Kit

A

Standard and Fast Road

SPF4181K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

B

High-Performance Version

SPF4181-90K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 2hrs

15

Control Arm Lower-Outer Bush Kit

SPF4426K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

16

Control Arm Upper-Inner Bush Kit

SPF4193K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

17

Control Arm Upper-Outer Bush Kit

SPF4194K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

18

Trailing Arm Bush Kit

SPF4195K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

19

Anti-Roll Bar Bush Kit

A

To Suit OE 22mm Bar (most common)

SPF4183-22K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr

B

To Suit OE 23mm Bar

SPF4183-23K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr

C

To Suit OE 25mm Bar

SPF4183-25K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr

20

22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar & Link Kit

RC0033RZ-22KIT

Multi Link Rear Axle Only, Factory fit, includes bushings and 3 stage anti-corrosion coating. Includes Heavy Duty, High Articulation Anti-Roll Bar Links

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes, 2 x Links

Fitment Difficulty:

Fitting Time: 2hrs

21

22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

RC0033RZ-22

Multi Link Rear Axle Only, Factory fit, includes bushings and 3 stage anti-corrosion coating

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

22

Anti-Roll Bar Link Kit

TRC4300

Heavy-Duty, High-Articulation Anti-Roll Bar Links

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing