×

PRODUCT RANGES:

Anti-Roll Bar Links

[NEW] OEM+ Front Control Arm Kits

Lightweight Alloy Front Control Arm Kits

Greasable Shackle and Pin Kits

SELECT YOUR VEHICLE:

Select Make Select Model Select Vehicle Year

OR, SELECT VEHICLE MANUFACTURER:

Improve Directional Stability

Front

1

Front Roll Centre / Bump Steer Correction Kit

KCA472 Front Roll Centre / Bump Steer Correction Kit

A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

IMPORTANT - Check clearance with aftermarket rotors

Quantity required: 1

2

Front Control Arm Bush Kit

A

Standard Alignment

KIT5360CAK Standard Alignment

Kit includes: 1xSPF4175K, 1xSPF4176K

Quantity required: 1

B

Caster Increase

KIT5360CADJK Caster Increase

Kit includes: 1xSPF4175K, 1xSPF4178K

Quantity required: 1

3

Complete Lower Control Arm Kit

A

Steel Performance Alignment

TRC1071 Steel Performance Alignment

Comes complete with offset performance alignment SuperPro bushes for increased caster and and ball joints as a simple and quick repair/upgrade solution.

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs

Fitting Time icon

Wheel-alignment required after fitment

B

Lightweight Alloy Adjustable with DuroBall

ALOY0018K Lightweight Alloy Adjustable with DuroBall

These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.

These enhancements are the optimal settings over standard to produce a better handling vehicle.

SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.

The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.

The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Quantity required: 1

Kit Includes: 2 x Arms

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs

Fitting Time icon

Wheel-alignment required after fitment

4

Control Arm Lower Front Bush Kit

SPF4175K Control Arm Lower Front Bush Kit

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

5

Control Arm Lower Rear Bush Kit

A

Standard Alignment

SPF4176K Standard Alignment

Standard Replacement

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

B

Performance Alignment Kit

SPF4178K Performance Alignment Kit

Double Caster Offset up to 2 degrees caster adjustment.

Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt

A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

Fitting Time: 3hrs

Fitting Time icon

6

Extra Camber Strut Mounts

TRC5000 Extra Camber Strut Mounts

Made from cast aluminium and featuring SuperPro's unique polyurethane to keep it securely but comfortably located, this part gives 1 degree of extra camber adjustment using the top-mount. It's been designed to work with OE suspension (including damptronic OE dampers) and aftermarket coilovers.

Quantity required: 1

Kit Includes: 2 x Mounts

7

24mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

RC0033FZ-24 24mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

Factory fit. Includes bushings and 3 stage anti-corrosion coating

Quantity required: 1

Kit Includes: 1 x

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs

Fitting Time icon

Wheel-alignment required after fitment

8

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC4301 Anti-Roll Bar Link Kit - Heavy Duty Adjustable

12mm Ball Joint Adjustable Link, Minimum Length 320 mm. Maximum Length 365 mm. OE length 355mm

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr

Fitting Time icon

Rear

9

Control Arm Lower-Inner Front Bush Kit

SPF3350K Control Arm Lower-Inner Front Bush Kit

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs

Fitting Time icon

Wheel-alignment required after fitment

10

Control Arm Lower-Inner Bush Kit

A

Standard and Fast Road

SPF4181K Standard and Fast Road

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

11

Control Arm Lower-Outer Bush Kit

SPF4426K Control Arm Lower-Outer Bush Kit

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs

Fitting Time icon

Wheel-alignment required after fitment

12

Control Arm Upper-Inner Bush Kit

SPF4193K Control Arm Upper-Inner Bush Kit

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs

Fitting Time icon

Wheel-alignment required after fitment

13

Control Arm Upper-Outer Bush Kit

SPF4194K Control Arm Upper-Outer Bush Kit

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs

Fitting Time icon

Wheel-alignment required after fitment

14

Anti-Roll Bar Bush Kit

A

To Suit OE 23mm Bar

SPF4183-23K To Suit OE 23mm Bar

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr

Fitting Time icon

15

22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

RC0033RZ-22 22mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar

Multi Link Rear Axle Only, Factory fit, includes bushings and 3 stage anti-corrosion coating

Quantity required: 1

Kit Includes: 1 x

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs

Fitting Time icon

Wheel-alignment required after fitment

16

Anti-Roll Bar Link Kit

TRC4300 Anti-Roll Bar Link Kit

Heavy-Duty, High-Articulation Anti-Roll Bar Links

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr

Fitting Time icon

Related News

VAG MQB Standard and Offset Lower Control Arm Assembly Kits (Product News)
SuperPro Overhauls an ageing SEAT Leon FR at Demon Tweeks (General News)

Contact your nearest Audi A3 specialist