Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
Easy-Lift Kit
TRC218LK
This kit will lift the vehicle approx. 25mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts. To be used with standard suspension only.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
SuperPro Front Easy-Lift Strut Spacer Trim Kit
TRC143FLK
This kit will lift the front of the vehicle approx. 20mm and can be used with standard suspension and raised suspension.
Kit contains 2 Front Strut Spacers, 2 Shortened bump stops.
Use this Kit on a lifted vehicle to return the vehicle to the standard factory rake.
Kit contains 2 Front Strut Spacers, 2 Shortened bump stops.
Use this Kit on a lifted vehicle to return the vehicle to the standard factory rake.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
Bump Stop Bush Kit
SPF4633K
Shortened Upper Bump Stop. Allows more droop travel for lifted vehicles but not to be used with TRC500 or TRC501
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Control Arm Upper Complete Assembly - Fixed Offset
TRC6500
Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
6
Lift Correction Upper Control Arm Kit
Vehicles Without Headlight Sensor
TRC500
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.
Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Not suitable for vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Not suitable for vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Arms
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
Vehicles With Headlight Sensor
TRC501
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Now just £429.00 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms
Fitment Difficulty:
Fitting Time: 3hrs
Control Arm Lower-Inner Bush Kit
SPF2991K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 4hrs
Wheel-alignment required after fitment
Control Arm Upper-Inner Bush Kit
SPF2997K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
ReadyStrut Top Caps
RS004K
Strut Caps, Spring Seats, Boots, Nuts & Washers
Quantity required: 1
Now just £118.80 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Shock Absorber Lower Bush Kit
SPF2940PK
Utilises superior Polyelast material for massive increase in durability in all applications.
Quantity required: 1
Now just £38.28 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
Anti-Roll Bar To Chassis Bush Kit
SPF2993-31K
Suits O.E Anti-Roll Bar size
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
33mm Heavy-Duty Non-Adjustable Anti-Roll Bar
RC0098F-33
SuperPro Roll Control Front Anti-Roll Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation. Upgrading the front Anti-Roll Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis - Increase tyre life - Control body roll in load carrying and towing applications - Improve safety with no loss of comfort or articulation SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Anti-Roll Bar Kit to get the complete handling upgrade package
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
20mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0073RZ-20
Can not be used with Airbags fitted in the rear
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
ABS Cable Bracket Extension Kit
SPF4896K
Quantity required: 1
Was £22.68. Now just £11.34 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 1 x Steel Tube, 1 x Bolts, 2 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 30mins
Greasable Shackle and Bush Kit - Rear of Spring
KIT0218RSK
Contains Greasable Shackles and SuperPro Bushings. These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Greasable Shackle and Bushing Kit
KIT0218SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings. These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Quantity required: 1
Now just £85.80 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 1hr
Leaf Spring Bush Kit
KIT0218K
These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Spring Front Eye Bush Kit
SPF4631K
Quantity required: 1
Was £86.70. Now just £43.36 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
Spring Rear Eye Bush Kit
SPF4632K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Spring Shackle Upper Bush Kit
SPF0187K
Leaf spring model
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Greasable Pin and Bush Kit - Front Eye
SPF4459BK
Quantity required: 1
Was £156.46. Now just £78.23 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates
Brake Line Spacer Kit
SPF4954K
For use on lifted vehicles (including Easy-Lift Kit TRC218LK)
Quantity required: 1
Was £20.75. Now just £10.38 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x Brake Line Spacer
Fitment Difficulty:
Fitting Time: 30mins
Related News
- Alex Bones wins Round 1 of the Time Attack series in his Evo 5 RS (Motorsport News)
- Bush and suspension parts upgrade kits for the Series 5 Mitsubishi L200 (Product News)