×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

No Increase in Noise, Vibration or Harshness

Engine Bay

1

Front Engine Torque Arm Upgrade

KDT975
The torque arm assists in controlling the engine and drivetrain's forward and aft twisting motion.

The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel.

Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology, this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Quantity required: 1

Front and Rear

2

-20mm Progressive Rate Lowering Spring Kit

WSK-VWN006
Front and rear performance progressive rate coil spring kit - lowers vehicle 20mm front and rear.

Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 4.1kg/mm (229lb/in) front-rated springs that provide a 20mm drop, while the 4.8kg/mm (269lb/in) rated rears deliver a desirable 20mm to the vehicle. By lowering the vehicle's centre of gravity, the unique and progressive rate coil design not only improves performance but enhances the overall appearance.

Developed and manufactured in Europe from the highest quality materials, coating, and the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks.

Quantity required: 1

3

Front and Rear Suspension Bush Kit (For normal road use)

KIT5362K
No Photo Available
Kit includes; 1xSPF4175K, 1xSPF4176K, 1xSPF3348K, 1xSPF3349K,1XSPF4426K, 1xSPF4181K, 1xSPF3350K, 1xSPF3351K, 1xSPF4195K

Quantity required: 1

Front

4

Front Control Arm Bush Kit

A

Standard Alignment

KIT5360CAK
Kit includes: 1xSPF4175K, 1xSPF4176K

Quantity required: 1

B

Caster Increase

KIT5360CADJK
Kit includes: 1xSPF4175K, 1xSPF4178K

Quantity required: 1

5

Complete Lower Control Arm Kit

A

Steel Performance Alignment

TRC1071
Comes complete with offset performance alignment SuperPro bushes for increased caster and and ball joints as a simple and quick repair/upgrade solution.

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Lightweight Alloy Adjustable with DuroBall

ALOY0018K
These arms have inbuilt caster and camber change and are designed to move the lower ball joint forward and out to increase the caster by 1 Degree and induce a negative camber change of up to 0.5 Degrees.

These enhancements are the optimal settings over standard to produce a better handling vehicle.

SuperPro has stringently tested these control arms on the Golf 7 GTi, R and Audi A3 RS3 in both standard configuration and with lowered springs.

The sub frame in these vehicles has no positive location and there is a lot of movement allowable in the bolt holes. Therefore, it is critical that sub frame is not misaligned during re-installation. For this reason and for proper clearance it is critical the sub frame be in the most rearward position when torqued up. These arms have not been tested with any aftermarket engine mount packages that may cause a sub frame misalignment and care must be taken.

The recommended lowered front centre of the wheel is 330mm. See fitting instruction for more

Quantity required: 1

Kit Includes: 2 x Arms

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

6

Control Arm Lower Front Bush Kit

SPF4175K

OEM Part Number: 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A, 1K0407182, 1K0407182A, 5Q0407182, 5Q0407182A

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

7

Control Arm Lower Rear Bush Kit

A

Standard Alignment

SPF4176K
Standard Replacement

OEM Part Number: 5Q0407183C, 5Q0407183D, 5Q0407183E, 5Q0407183G, 5Q0407183J

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

B

Performance Alignment Kit

SPF4178K
Double Caster Offset up to 2 degrees caster adjustment.

Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt

A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes

Fitting Time: 3hrs
Fitting Time icon

8

Extra Camber Strut Mounts

TRC5000
Made from cast aluminium and featuring SuperPro's unique polyurethane to keep it securely but comfortably located, this part gives 1 degree of extra camber adjustment using the top-mount. It's been designed to work with OE suspension (including damptronic OE dampers) and aftermarket coilovers.

Quantity required: 1

Kit Includes: 2 x Mounts

9

26mm Heavy Duty 2 position blade adjustable sway bar

RC0052FZ-26
Includes bushings and 3 stage anti-corrosion coating.

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Brackets, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

10

Front Anti-Roll Bar Link Kit

A

OE-Quality Kit

TRC4048

Quantity required: 2

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

B

Heavy-Duty Adjustable Kit

TRC4301
12mm Ball Joint Adjustable Link, Minimum Length 320 mm. Maximum Length 365 mm. OE length 355mm

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

11

Rear Suspension Bush Kit (For normal road use)

KIT5362RK
No Photo Available
Kit includes; 1xSPF3348K, 1xSPF3349K,1XSPF4426K, 1xSPF4181K, 1xSPF3350K, 1xSPF3351K, 1xSPF4195K

Quantity required: 1

12

Control Arm Lower-Inner Front Bush Kit

SPF3350K

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

13

Control Arm Lower-Inner Bush Kit

A

Standard and Fast Road

SPF4181K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

14

Control Arm Lower-Outer Bush Kit

SPF4426K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

15

Control Arm Upper-Inner Bush Kit

SPF4193K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

16

Control Arm Upper-Outer Bush Kit

SPF4194K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

17

Anti-Roll Bar Bush Kit

A

To Suit OE 23mm Bar

SPF4183-23K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

18

22mm Heavy Duty 2 Position Blade Adjustable Sway Bar

RC0052RZ-22
Multi Link Rear Axle Only, Factory fit, includes bushings and 3 stage anti-corrosion coating.

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

19

24mm Heavy Duty 2 Position Blade Adjustable Sway Bar

RC0052RZ-24
Multi Link Rear Axle Only, Factory fit, includes bushings and 3 stage anti-corrosion coating

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

20

Anti-Roll Bar Link Kit

TRC4300
Heavy-Duty, High-Articulation Anti-Roll Bar Links

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Related News

Contact your nearest Audi A3 specialist

Back to Top