Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Does your car feel vague or unresponsive in corners?
Control Arm Lower-Inner Front Bush Kit
SPF2306FK
Standard replacement
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins
Control Arm Lower-Inner Front Bush Kit - Double Offset
SPF3424K
Alignment Correction
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 3hrs 30mins
Control Arm Lower-Inner Front Bush Kit - Single Offset
SPF3423K
Alignment Correction
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 3hrs 30mins
Control Arm Lower-Inner Rear Bush Kit
SPF3398K
Quantity required: 1
Was £123.25. Now just £61.63 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 3hrs
Sway Bar Link
TRC4004
Cut To Length Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm
Minimum Length 80mm - Maximum Length 320mm
Quantity required: 2
Next Stock Due 12 April 2024
Pre-order now be ensure you get yours.
Fitting Time: 30mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC10160
10mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 210 mm - Maximum Length 260 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF3166-26K
available Sizes 24, 25, 26 & 28mm
Quantity required: 1
Was £58.03. Now just £29.02 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF3166-28K
available Sizes 24, 25, 26 & 28mm
Quantity required: 1
Was £58.03. Now just £29.02 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitting Time: 1hr
Control Arm Lower-Inner Rear Bush Kit
SPF2318K
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins
Control Arm Lower-Outer Bush Kit
SPF2317K
Quantity required: 1
Was £126.19. Now just £63.10 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes
Fitting Time: 2hrs 30mins
Control Arm Lower-Rear Bush Kit
SPF3476K
Bushing located in Hub
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 3hrs 30mins
Sway Bar Link
TRC4070L
LHS - Standard Replacement10mm Ball Joint Link
60 Degree opposed
Length 75mm center to center
60 Degree opposed
Length 75mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 30mins
Sway Bar Link
TRC4070R
RHS - Standard Replacement10mm Ball Joint Link
60 Degree opposed
Length 75mm center to center
60 Degree opposed
Length 75mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 30mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF3167-19K
available Sizes 16, 19 & 21mm
Quantity required: 1
Was £45.96. Now just £22.98 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitting Time: 1hr
Related News
- Front Control Arm replacement kit for the 2016 and later Honda Civic FK (Product News)
- Honda Civic EK Series SuperPro Bush Kits (Product News)
- Front Control Arm Bush Kit for the Honda Civic EP3, Integra DC5 and CR-V (Product News)