×

OR, SELECT YOUR VEHICLE

No Increase in Noise, Vibration or Harshness

Front

1

Camber Adjusting Bolt Kit

A

12mm Diameter Bolts

SPF4351-12K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

B

15mm Diameter Bolts

SPF4351-15K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm

Quantity required: 1

Kit Includes: 2 x Bolts

2

Control Arm Lower-Inner Front Bush Kit

SPF0996K

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

3

Control Arm Lower-Rear Bush Kit

A

Standard Alignment Kit

SPF1900K
Standard 8/1995 - 7/1999

Quantity required: 1

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

B

Alignment Correction (08/1995 to 07/1996)

SPF1901K
Alignment Correction. Suits vehicles 08/1995 - 07/1996
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 6 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

C

Alignment Correction for Performance

SPF1902K
Alignment Correction for Performance. Do not decrease RHS caster as it fouls chassis

Quantity required: 1

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

D

NOT Vertical Type Pivoting Style Bushing (07/1994 to 07/1995)

SPF2298K
7/1994 to 7/1995 "NOT Vertical Type Pivoting Style Bushing" Replaces original bushing OEM 48655-12080, Re-use original front washer

OEM Part Number: 48655-12080

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

4

Anti-Roll Bar Link Kit

A

Standard Replacement Kit

TRC4016
Standard Replacement10mm parallel Ball Joint Link

Length 63mm center to center

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

B

Heavy-Duty Adjustable

TRC1025
10mm Ball Joint Adjustable Link

Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

5

Anti-Roll Bar Mount Bush Kit

A

To Fit 19.5mm Bar

SPF3306-19.5K
Suits OE Bar Size

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

B

To Fit 20mm Bar

SPF3306-20K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

C

To Fit 22mm Bar

SPF3306-22K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

D

To Fit 24mm Bar

SPF3306-24K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

E

To Fit 25mm Bar

SPF3306-25K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

F

To Fit 26mm Bar

SPF3306-26K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

6

Camber Adjusting Bolt Kit

A

12mm Diameter Bolts

SPF4351-12K
Adds +/- 1.5 Degree CamberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

B

15mm Diameter Bolts

SPF4351-12K
Adds +/- 1.5 Degree CamberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

7

Control Arm Bush Kit

SPF1947K
Suited to vehicles with inside diameter of housing being 28mm

Quantity required: 1

Kit Includes: 8 x Steel Tubes, 8 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

8

Control Arm Front-Inner Outer Kit

SPF2938K
Bore diameter is 31mm.Suited to vehicles with Hyme joint rear control arms

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

9

Anti-Roll Bar Link Kit

A

Standard Replacement Kit

TRC4021
Standard Replacement10mm Ball Joint Link

180 Degree opposed

Length 108mm center to center

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

B

Cut-to-Length Kit

TRC4004
Cut To Length Link10mm Ball Joint Link

Minimum Length 80mm - Maximum Length 320mm

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

C

Heavy-Duty Adjustable

TRC1045
10mm Ball Joint Adjustable Link

Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

10

Anti-Roll Bar Mount Bush Kit

A

To Fit 16mm Bar

SPF0613-16K
To fit 16mm bar. Available Sizes 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm. Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system.
Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar.
An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

B

To Fit 16.5mm Bar

SPF0613-16.5K
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

11

Trailing Arm Bush Kit

SPF0823K

Quantity required: 1

Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Contact your nearest Toyota specialist

Back to Top