×

OR, SELECT YOUR VEHICLE

Does your car feel vague or unresponsive in corners?

Front

1

Camber Adjusting Bolt Kit

SPF4351-17K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 17mm

Quantity required: 1

Kit Includes: 2 x Bolts

2

Control Arm Lower-Rear Bush Kit

A

Standard Alignment Kit

SPF5043K
To directly replace the OE rubber bushes to provide more positive steering and feel.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Spacers

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

B

Steering-Pull Correction Kit

SPF5044K
Single caster offset, approx. 1 degree change.

Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.

Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.

Follow the installation instructions and the problem is solved.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Spacers

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

C

Performance Alignment Kit

SPF5045K
Double caster offset, approx. 2 degree change

A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.

The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Spacers

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

3

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC12200
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

12mm Ball Joint Adjustable Link

Minimum Length 254 mm - Maximum Length 305 mm

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits:
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Related News

Contact your nearest Toyota specialist

Back to Top