Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
1
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment - Suits 60mm ID Lower Arm
SPF3111K
Standard replacement. Suits 60mm ID lower arm
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Standard Alignment - Suits 63mm ID Lower Arm
SPF3133K
Standard replacement
OEM Part Number: 54584-1C300
Quantity required: 1
Was £167.69. Now just £83.84 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Steering-Pull Correction Kit - Suits 60mm ID Lower Arm
SPF3112K
Alignment Correction. Suits 60mm ID lower arm
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 6 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Steering-Pull Correction Kit - Suits 63mm ID Lower Arm
SPF3134K
Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer?s specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers' side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer?s specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers' side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
OEM Part Number: 54584-1C300
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs
Performance Alignment Kit - Suits 60mm ID Lower Arm
SPF3113K
Alignment Correction. Suits 60mm ID Lower arm
1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Performance Alignment Kit - Suits 63mm ID Lower Arm
SPF3135K
Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300.
1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
OEM Part Number: 54584-1C300
Quantity required: 1
Was £167.10. Now just £83.56 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Heavy-Duty Adjustable Anti-Roll Bar Link Kit
TRC10200
10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr