Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
Camber Adjusting Bolt Kit
SPF4351-12K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 12mm
Quantity required: 1
Out of Stock. No longer stocked.
2
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment. Suits 60mm ID Lower Arm
SPF3111K
Standard replacement. Suits 60mm ID lower arm
suits Vehicles from 08/2002-on
2 x Standard bushings per kit
suits Vehicles from 08/2002-on
2 x Standard bushings per kit
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitting Time: 3hrs
Standard Alignment. Suits 63mm ID Lower Arm
SPF3133K
Standard replacement. Suits 63mm ID lower arm.
suits Vehicles from 08/2002-on
2 x Standard bushings per kit
suits Vehicles from 08/2002-on
2 x Standard bushings per kit
Quantity required: 1
Was £167.69. Now just £83.84 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitting Time: 3hrs
Steering-Pull Correction Kit. Suits 60mm ID Lower Arm
SPF3112K
Alignment Correction. Suits 60mm ID lower arm
0.5 Degree Caster Adjustment available suits Vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available suits Vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 6 x Polyurethane Bushes
Fitting Time: 3hrs
Steering-Pull Correction Kit. Suits 63mm ID Lower Arm
SPF3134K
Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300.
0.5 Degree Caster Adjustment available suits Vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available suits Vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Fitting Time: 3hrs
Performance Alignment. Suits 60mm ID Lower Arm
SPF3113K
Alignment Correction. Suits 60mm ID Lower arm
1 Degree Caster Adjustment available suits Vehicles from 08/2002-on
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available suits Vehicles from 08/2002-on
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitting Time: 3hrs
Performance Alignment. Suits 63mm ID Lower Arm
SPF3135K
Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300.
1 Degree Caster Adjustment available suits Vehicles from 08/2002-on
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available suits Vehicles from 08/2002-on
2 x offset bushings for caster adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Was £167.10. Now just £83.56 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitting Time: 3hrs
3
Control Arm Lower-Rear Bush Kit
Standard Alignment
SPF4685K
Standard replacement. Suits 52mm ID lower arm
suits Vehicles up to 08/2002
suits Vehicles up to 08/2002
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Fitting Time: 3hrs
Steering-Pull Correction
SPF4686K
Alignment Correction. Suits 52mm ID lower arm
suits Vehicles up to 08/2002
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
suits Vehicles up to 08/2002
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Fitting Time: 3hrs
Performance Alignment
SPF4687K
Alignment Correction. Suits 52mm ID lower arm
suits Vehicles up to 08/2002
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
suits Vehicles up to 08/2002
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Was £131.33. Now just £65.66 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Fitting Time: 3hrs
4
Anti-Roll Bar Link Kit
Standard Replacement
TRC4058
Standard Replacement. 10mm Ball Joint Link
180 Degree opposed
Length 130mm center to center
180 Degree opposed
Length 130mm center to center
Quantity required: 2
Out of Stock. No longer stocked.
Fitting Time: 30mins
Heavy-Duty Adjustable
TRC1045A
10mm Ball Joint Adjustable Link
Minimum Length 125 mm - Maximum Length 145 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 125 mm - Maximum Length 145 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitting Time: 1hr
Trailing Arm Lower-Front Bush Kit
SPF0907K
Quantity required: 1
Was £69.16. Now just £34.58 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 2hrs 30mins
Trailing Arm Lower-Rear Bush Kit
SPF0906K
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins