Ford Ranger PX II 3.2 TDCi 4x4 Suspension Upgrades

1

Easy-Lift Kit

This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts. To be used with standard height suspension only

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs 30mins

Wheel-alignment required after fitment

2

Control Arm Lower Camber Bolt Kit

TRC0030

Quantity required: 1

Was £254.08. Now just £127.04 (inc. VAT)

Only 1 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

3

Differential Drop Kit

TRCRANGDD

For lifted vehicles. Reduces stress on CV joints by dropping the height of the differential.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

4

Strut Top Spacer Kit

TRC008-6

Spacer Sleeve, suspension strut mount.

Raises vehicle approximately 10-12mm.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs 30mins

Wheel-alignment required after fitment

5

Control Arm Lower Complete Assembly Kit - Standard

TRC561

Complete Arm Assemblies with Standard SuperPro Bushings & Uprated Ball Joints
This SuperPro Control Arm Kit is the ideal repair and upgrade solution!

Two complete Arm Assemblies
Advanced SuperPro Bushings
pre-installed High Quality Up-rated Ball Joints
Easy to Install

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

Wheel-alignment required after fitment

6

Control Arm Upper Complete Assembly

A

Fixed-Offset

TRC6560

Increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

B

Adjustable

TRC560

+/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment. Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 2 x Arms, 2 x Ball Joints

Fitment Difficulty:

Fitting Time: 2hrs

7

34mm Heavy Duty 2-Position Blade-Adjustable Anti-Roll Bar

RC0009FZ-34

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

8

Anti-Roll Bar Link Kit

TRC12160

12mm Ball Joint adjustable link. Minimum length 210mm to maximum length 260mm. Made with 6060-T5 Alloy Ball for low friction and long life. Spanner provision for on-car adjustment. Eliminates Anti-Roll Bar link flex. Allows for neutral Anti-Roll Bar positioning. Maximises all positions on adjustable Anti-Roll Bars. Suits lowered or raised vehicles

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

Wheel-alignment required after fitment

9

Anti-Roll Bar to Chassis Mount

SPF3800-32K

32mm bar is standard on Wildtrak. 30 & 34mm also available so please measure your bar diameter.

Quantity required: 1

Was £55.64. Now just £27.83 (inc. VAT)

Only 2 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr

10

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF3796K

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

B

Camber-Adjustable Kit

SPF3892K

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

11

Control Arm Lower Inner Front Bush

SPF3695K

Quantity required: 1

Was £403.25. Now just £201.62 (inc. VAT)

Only 1 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 8 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

12

Front Upper Spring Seat Bush Kit

SPF4093K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs 30mins

Wheel-alignment required after fitment

13

ReadyStrut Top Caps

A

Standard (OEM) Struts

RS011K

OEM Strut Cap, Spring Seat, Nuts & Washers - Pair

Quantity required: 1

Out of Stock. No longer stocked.

B

Bilstein and Raw Struts

RS006K

Bilstein Strut Cap, Spring Seat, Nuts & Washers - Pair

Quantity required: 1

Was £138.52. Now just £69.26 (inc. VAT)

Only 2 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

14

Shock Absorber Lower Bush

SPF3805K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

15

Shock Absorber Upper Bush

SPF4733K

Standard Replacement, Suits O.E struts

Quantity required: 1

Was £50.63. Now just £25.32 (inc. VAT)

In Stock

For immediate despatch.

Buy It Now

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

16

Easy-Lift Rear Lift Kit

TRC169RLK

This kit will lift the vehicle approx. 45mm and retains the standard suspension.
It is a safe, legal alternative to Extended Shackles.

Kit contains:

2 x Rear Raising Blocks
4 x U-Bolts

To be used with standard height suspension only.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

Wheel-alignment required after fitment

17

Centre Bearing Alignment Kit

SPF4659K

Re-Aligns Tail Shaft on lifted vehicles to remove vibration

Quantity required: 1

Was £79.69. Now just £39.85 (inc. VAT)

In Stock

For immediate despatch.

Buy It Now

Kit Includes: 2 x Nuts, 6 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:

Fitting Time: 1hr

Wheel-alignment required after fitment

18

Spring Rear Bush Kit - All

KIT0168K

Kit Includes 1xSPF3802K, 1xSPF3804K, 1xSPF3803K

These bushings are often overlooked when upgrading the suspension of a 4WD.

Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.

It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.

This can be especially noticeable carrying a load or towing a boat or caravan.

The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.

By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it and are easily serviceable!

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

19

Spring Front Eye Bush

SPF3802K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

20

Spring Rear Eye Bush

SPF3804K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

21

Spring Shackle Upper Bush

SPF3803K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

22

Greasable Shackle and Bush Kit

KIT0168SK

Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings.

These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

23

Heavy Duty 3-Position Blade-Adjustable Anti-Roll Bar

A

20mm Bar (models without AdBlue)

RC0009RZ-20

Please note - this kit is not suitable for vehicles fitted with the AdBlue system.

Quantity required: 1

Now just £142.80 (inc. VAT)

In Stock

For immediate despatch.

Buy It Now

Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit

Fitment Difficulty:

Fitting Time: 4hrs

B

22mm Bar (models without AdBlue)

RC0009RZ-22

Please note - this kit is not suitable for vehicles fitted with the AdBlue system.

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 1 x Anti-Roll Bar Kit

Fitment Difficulty:

Fitting Time: 4hrs

C

22mm Bar Bar (models with AdBlue)

RC0104RZ-22

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing