Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
Strut Top Spacer Kit
TRC008-6
Raises vehicle approximately 10-12mm.
Quantity required: 1
Out of Stock. No longer stocked.
Wheel-alignment required after fitment
ReadyStrut Top Caps
RS002K
Quantity required: 1
Out of Stock. No longer stocked.
Shock Absorber Lower Bush Kit
SPF2348PK
Utilises superior SuperPro Hybrid material for massive increase in durability in all applications.
Quantity required: 1
Out of Stock. No longer stocked.
Wheel-alignment required after fitment
Control Arm Lower Bush Kit
SPF4051K
Quantity required: 1
Out of Stock. No longer stocked.
Control Arm Lower Camber Bolt Kit
TRC0040
The trouble starts when the front lower camber bolts rust into the tubes of the standard camber bolt set up and the tube of the rear bushing.
A one piece front bolt and rear bolt designed to not corrode makes future wheel alignments trouble free.
Quantity required: 2
Was £145.06. Now just £72.53 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Bolts, 2 x Nuts, 2 x Washers
Wheel-alignment required after fitment
Control Arm Lower Complete Assembly Kit - Standard
TRC483
Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Uprated Ball Joints
- Improved Quality replacement Camber Bolts
The perfect replacement for your worn ball joints, worn bushes and seized camber pins!
Quantity required: 1
Out of Stock. No longer stocked.
Wheel-alignment required after fitment
Control Arm Upper Complete Assembly
Fully Adjustable Offset
TRC480
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes
Wheel-alignment required after fitment
Fixed Offset
TRC6480
Quantity required: 1
Out of Stock. No longer stocked.
Wheel-alignment required after fitment
Control Arm Upper - Inner Bushing
Standard Alignment
SPF2845K
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Camber Decrease for Raised Vehicles
SPF3230K
Quantity required: 1
Was £337.51. Now just £168.76 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane
Differential Drop Kit
TRCHILUXDD
When lifting the 2005 to current model Hilux 4WD, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted.
Quantity required: 1
Out of Stock. No longer stocked.
Anti-Roll Bar Bush Kit
Standard 29mm Bar
SPF5068-29K
Quantity required: 1
Was £44.30. Now just £22.15 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
31mm Bar
SPF5068-31K
Quantity required: 1
Was £44.30. Now just £22.15 (inc. VAT)
In Stock
For immediate despatch.
30mm Heavy Duty Sway Bar
RC0059FZ-30
Quantity required: 1
Out of Stock. No longer stocked.
Left-Hand Anti-Roll Bar Link
TRC4017L
Quantity required: 1
Out of Stock. No longer stocked.
Right-Hand Anti-Roll Bar Link
TRC4017R
Quantity required: 1
Out of Stock. No longer stocked.
Anti-Roll Bar Links
Standard Replacement. 128mm Center to center
TRC4040
Quantity required: 2
Out of Stock. No longer stocked.
Kit Includes: 1 x Link
Heavy Duty Extended
TRC4307
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation.
Quantity required: 2
Out of Stock. No longer stocked.
Kit Includes: 1 x Link
Heavy Duty Adjustable
TRC1285V
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Anti-Roll Bar Bush Kit
Suits OE 18mm Bar
SPF4059-18K
Quantity required: 1
Was £39.88. Now just £19.94 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Suits 20mm Bar
SPF4059-20K
Quantity required: 1
Was £50.03. Now just £25.02 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Suits 25mm Bar
SPF4059-25K
Quantity required: 1
Was £50.03. Now just £25.02 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Suits 27mm Bar
SPF4059-27K
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
Trailing Arm - Lower - Bush All
SPF2461K
Quantity required: 2
Was £97.37. Now just £48.68 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes
