Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
Front Control Arm Bush Kit
KIT5298FK
Kit Includes: 1xSPF3279K, 1xSPF3278K, 1xSPF3277K
Quantity required: 1
Control Arm Lower - Inner Rear Bush
SPF3278K
Replaces OE# 48655-60040
OEM Part Number: 48655-60040
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
4
Control Arm Upper Complete Assembly
Adjustable
TRC485
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction
Adjustable up to 4 Degrees increase in Caster and + or - 2 Degrees Camber Adjustment
Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
Adjustable up to 4 Degrees increase in Caster and + or - 2 Degrees Camber Adjustment
Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
6
Coil Spring Spacer
Raises Vehicle Approximately 20mm
SPF3281-20K
Shock Absorber - Upper Bush
SPF3743K
Quantity required: 1
Kit Includes: 4 x Washer(s) - used for Steel and / or Polyurethane, 4 x Polyurethane Bushes
Differential Drop Kit
TRCLC200DD
Suits Lifted vehicles.
It is supplied complete with all required spacers, bolts, washers and nuts.
When lifting the 2007 to current 200 Series Land Cruiser, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted.
It is supplied complete with all required spacers, bolts, washers and nuts.
When lifting the 2007 to current 200 Series Land Cruiser, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted.
Quantity required: 1
Kit Includes: 10 x Spacers, 10 x Bolts, 14 x Washer(s) - used for Steel and / or Polyurethane, 2 x Nuts
Fitment Difficulty:
Fitting Time: 2hrs
9
Anti-Roll Bar Mount To Chassis Bush
Non-KDSS Vehicles
SPF3448-35K
Non KDSS Vehicles, Suits OE Bracket #48824-60170. 32, 35,37.5,39 & 40mm available
Anti-Roll Bar Link Lower Bushing
SPF2147K
39mm Extra Heavy Duty Anti-Roll Bar
RC0029F-39
Trailing Arm & Panhard Rod Bush Kit
KIT5298RKKit Includes: 1xSPF3292K, 1xSPF3286K, 1xSPF3285K
Quantity required: 1
Panhard Rod Bush
SPF3292K
14
Coil Spring Spacer
Raises Vehicle Approximately 15mm
SPF3287-15K
Trailing Arm - Lower - Bush All
SPF3286K
Trailing Arm - Upper - Bush All
SPF3285K
18
Anti-Roll Bar Link Upper Bush Kit
Standard Use
SPF4805-80K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Heavy-Duty Use
SPF4805-90K
Quantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Anti-Roll Bar Mount To Chassis Bush
SPF3449-30K
Non KDSS Vehicles, Suits OE Bracket #48824-26230. 30, 33 & 34mm available
33mm Extra Heavy Duty Anti-Roll Bar
RC0029R-33