×

OR, SELECT YOUR VEHICLE

Does your car feel vague or unresponsive in corners?

Front and Rear

1

Body Mount Bush Kit

SPF1788K
Re-use original hardware. 2 x bushes per kit that fit in 10 locations on the vehicle.

OEM Part Number: ANR1504

Quantity required: 10

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

2

Radius Arms & Panhard Rods Bush Kit

A

Standard Alignment Kit

KIT0042K
No Photo Available
Bushes to replace front and rear of vehicle. Includes SPF2156K, SPF0127K, SPF0126K, SPF0130K, SPF0129K, SPF0128K

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 7hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Caster Correction Kit

KIT0042ADJK
No Photo Available
As per KIT0042K with eccentric radius arm to diff mount bushings to allow for Caster Correction. Includes SPF2156K, SPF0127K, SPF2559K, SPF0130K, SPF0129K, SPF0128K

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 7hrs
Fitting Time icon

Wheel-alignment required after fitment

Front

3

Panhard Rod Bush Kit

SPF2156K
Tube ID 12.8mm

OEM Part Number: 575580

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

4

Radius Arm To Chassis Mount Bush Kit

SPF0127K

OEM Part Number: 572608

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

5

Radius Arm To Diff Mount

A

Standard Alignment Kit

SPF0126K
Narrow Radius Arm - Crush tube length 48mm
Standard replacement. For Castor Correction see SPF2559K.

OEM Part Number: 575582/NRC1774

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

B

Caster Correction Kit

SPF2559K
Narrow Radius Arm, Crush Tube length 48mm, Bush OD 51mm. Offset Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position).

OEM Part Number: 575582/NRC1774

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Sleeves, 4 x Steel Tubes

6

Radius Arm Bushing Kit with Caster Correction & Standard Axle Alignment

KIT5244K
No Photo Available
Includes SPF2559K & SPF0127K

Quantity required: 1

7

Shock Absorber Upper and Lower Bush Kit

A

Original Shock Absorbers

SPF0075K
Original Shock Absorber Lower Bush only - Pin Mount.

Featuring a void in the centre of the bush design to allow lateral flexion which reduces stress on the shock absorber - a common cause of shock failure on these vehicles.

OEM Part Number: 552818

Quantity required: 2

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

B

Aftermarket Shock Absorbers

SPF1879K

Quantity required: 2

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Rear

8

Radius Arm To Chassis Mount Bush Kit

SPF0130K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Plates

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

9

Radius Arm To Axle Mount Bush Kit

SPF0129K

OEM Part Number: NTC1772

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

10

Shock Absorber Lower Bush Kit

A

Original Shock Absorbers

SPF0075K
Original Shock Absorber Lower Bush only - Pin Mount.

Featuring a void in the centre of the bush design to allow lateral flexion which reduces stress on the shock absorber - a common cause of shock failure on these vehicles.

OEM Part Number: 552818

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

B

Aftermarket Shock Absorbers

SPF1879K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

11

Shock Absorber Upper Bush Kit

SPF0078K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

12

Trailing Arm Upper Bush Kit

SPF0128K
Upper A Arm to chassis bush

OEM Part Number: NTC1773

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Related News

Contact your nearest 4X4 specialist

Back to Top