Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
No Increase in Noise, Vibration or Harshness
Engine Front Torque Arm
KDT974
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Quantity required: 1
Out of Stock. No longer stocked.
Engine Mount Insert Kit
SPF3981K
The insert fits into the voids of the original mounting bush and takes out some of the engine movement under acceleration and deceleration. This results in reduced stress on associated components (such as the exhaust system). Our insert has been caresfully developed to give greater control without introducing Noise, Vibration and Harshness into the cabin. Focus RS and ST Only
Quantity required: 1
Was £36.61. Now just £18.31 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x Polyurethane Bush
Front and Rear Anti-Roll Bar Upgrade Kit
BFK003
Everything you need to 'Activate More Grip'.
Contains BMF51X, BMR78XZ, KLC151 and KLC157.
Engineered to 'Activate More Grip', BFK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm front Anti-Roll bar and 24mm 2-point adjustable rear Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.
Contains BMF51X, BMR78XZ, KLC151 and KLC157.
Engineered to 'Activate More Grip', BFK003 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm front Anti-Roll bar and 24mm 2-point adjustable rear Anti-Roll bar, the kit is completed with high-quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.
Quantity required: 1
Out of Stock. No longer stocked.
4
Front And Rear Suspension Bush Kit
Standard Alignment
KIT0169K
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.
Quantity required: 1
Out of Stock. No longer stocked.
Caster & Camber Adjustable
KIT0170K
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.
Quantity required: 1
Out of Stock. No longer stocked.
5
Control Arm Bush Kit
Standard Alignment Kit
KIT0171K
Kit Includes: 1xSPF3368K, 1xSPF3115K
Quantity required: 1
Out of Stock. No longer stocked.
Performance Alignment Kit
KIT0171CADJK
Kit Includes: 1xSPF3370K, 1xSPF3115K
Quantity required: 1
Was £245.77. Now just £122.89 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo
KCA428
Important Notes: Adds +0.5deg caster + Anti-Lift.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.
Quantity required: 1
Out of Stock. No longer stocked.
24mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade
BMF51X
Important Notes: 24mm - non-adjustable - TUV certified.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Quantity required: 1
Out of Stock. No longer stocked.
Adjustable Front Anti-Roll Bar Links
KLC151
Suits models with 300mm link - adjustable extra heavy duty.
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Quantity required: 1
Out of Stock. No longer stocked.
Front Steering bump steer correction kit
KCA405
Important Notes: Reduces factory toe out from 6mm to 1mm (at 60mm bump)
Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced rear passive steer, and reduce understeer.
Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing, it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced rear passive steer, and reduce understeer.
Quantity required: 1
Out of Stock. No longer stocked.
10
Complete Front Control Arm Kit
18mm Ball Joints - Up to Feb 2006
TRC1135
This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
21mm Ball Joints - After March 2006
TRC1136
This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Ford Focus MK2 front control arms were changed by the manufacturer around February 2006. Vehicles made prior to this will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles made after February 2006 are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
11
Control Arm Lower-Inner Front Bush Kit
12mm Bolt
SPF2137K
12mm Bolt
Quantity required: 1
Was £76.68. Now just £38.34 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
14mm Bolt
SPF3115K
14mm Bolt
Quantity required: 1
Was £76.85. Now just £38.42 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes
12
Control Arm Lower-Inner Rear Bush
Standard Alignment Settings
SPF3368K
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Standard Alignment Settings with Bracket and Bolts
SPF4653K
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.
Quantity required: 1
Was £303.90. Now just £151.96 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Brackets
Steering-Pull Correction Kit
SPF3369K
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes
Performance Alignment Correction Kit
SPF3370K
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
13
Anti-Roll Bar Mount To Chassis Bush
To Fit OE Bar
SPF3114-20K
OE bar with flats at bush mounting point
Quantity required: 1
Out of Stock. No longer stocked.
To Fit Aftermarket Round Bars
SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
14
Anti-Roll Bar Link Kit
Cut-To-Length Link
TRC4004
10mm Ball Joint. Minimum length 80mm - maximum length 320mm
Quantity required: 2
Next Stock Due 12 April 2024
Pre-order now be ensure you get yours.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Anti-Roll Bar Link
TRC4025
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center
Quantity required: 2
Was £34.92. Now just £17.46 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Heavy-Duty Adjustable
TRC10200
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr
24mm Adjustable Rear Anti-Roll Bar
BMR78XZ
Important Notes: 24mm - 2 point adjustable - TUV certified
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 24mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.
Quantity required: 1
Out of Stock. No longer stocked.
Rear Anti-Roll Bar Link Kit
KLC157
Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.
Quantity required: 1
Out of Stock. No longer stocked.
Rear - Lower Front Control Arms
KTA137
Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.
Quantity required: 1
Out of Stock. No longer stocked.
Adjustable Control Arm Upper Rear
KTA138A
Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
Quantity required: 1
Out of Stock. No longer stocked.
Rear Control arms - Lower Front Arms
WA401
Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Quantity required: 2
Out of Stock. No longer stocked.
Rear Control Arms - Upper Arms
WA402
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.
Quantity required: 2
Out of Stock. No longer stocked.
Blade Trailing Arm Front Bush
SPF3466K
Do not remove original shell
Quantity required: 1
Out of Stock. No longer stocked.
Toe Control Arm Lower-Inner & Outer Bush Kit
SPF2323K
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Was £143.63. Now just £71.82 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Control Arm Lower Inner and Outer Bush
SPF2324K
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Now just £38.28 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes
24
Control Arm Upper-Inner Bush Kit
Standard Alignment Kit
SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Performance Alignment Kit
SPF2326K
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required
Quantity required: 1
Was £112.30. Now just £56.15 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
25
Control Arm Upper-Outer Bush Kit
Standard Alignment Kit
SPF2325KControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Performance Alignment Kit
SPF2326KPrefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Quantity required: 1
Was £112.30. Now just £56.15 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
26
Anti-Roll Bar Mount To Chassis Bush
To Fit OE Bar
SPF2578KOE bar with flats at bush mounting point
Quantity required: 1
Was £59.21. Now just £29.60 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
To Fit Aftermarket Round Bars
SPF2141-21KSuits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
Anti-Roll Bar Link Kit
TRC4002
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center
Quantity required: 2
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 30mins
Related News
- Ford Focus MK2 and Volvo C30/C70/S40/V50 Front Control Arm Kit (Product News)
- Caster Increase Bush Upgrades for the 2016-2018 Ford Focus RS (Product News)
- Ford Focus RS MK3 Upgraded Anti-Roll Bar Kit (Product News)
- Improving the Improved: Fast Fords benefit from the SuperPro effect (Product News)
- Breathing New Life into Classic Fords (General News)