Ford Fiesta MK7 1.6 TDCi Suspension Upgrades

1

Grip Series 1 Anti-Roll Bar and Lowering Spring Vehicle Kit Ford Fiesta MK7

Featuring rear anti-roll bar and lowered springs - contains WSK-FRD002 and BFR80 - essential to 'Activate more grip'.

The ultimate entry-level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit features a 22mm non-adjustable rear anti-roll bar and -30mm progressive rate lowering springs to improve the centre of gravity, turn-in and aesthetics without ruining ride comfort.

Quantity required: 1

Out of Stock. No longer stocked.

2

-30mm Performance Lowering Spring Kit Ford Fiesta MK7

WSK-FRD002

Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 2.6kg/mm (145lb/in) front-rated springs that provide a 30mm drop, while the 2.5kg/mm (140lb/in) rated rears deliver a desirable 30mm to the vehicle. By lowering the vehicle's centre of gravity, the unique and progressive rate coil design not only improves performance but enhances overall appearance. Developed and manufactured in Europe from the highest quality materials, coating and to the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation, match with Whiteline rear anti-roll bar BFR80.

Quantity required: 1

Out of Stock. No longer stocked.

3

Front And Rear Suspension Bush Kit

A

Standard Alignment Kit

KIT5346K

Kit includes 1xSPF3636K, 1xSPF3637K, 1xSPF3638-19K, 1xSPF5088K

Quantity required: 1

Out of Stock. No longer stocked.

4

Front Control Arm Bush Kit

A

Standard Alignment Kit

KIT5346CAK

Kit Includes 1x SPF3636K, 1x SPF3637K

Quantity required: 1

Out of Stock. No longer stocked.

B

Caster Increase Kit

KIT5346CADJK

Kit Includes 1x SPF3641K, 1x SPF3637K

Quantity required: 1

Out of Stock. No longer stocked.

5

Complete Lower Control Arm Kit

A

SuperPro Standard Alignment Arms

TRC1068

Comes complete with standard alignment SuperPro bushes and ball joints as a simple and quick repair/upgrade solution. Does not fit ST models.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

Wheel-alignment required after fitment

6

Control Arm Lower-Inner Front Bush Kit

SPF3637K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

7

Control Arm Lower-Inner Rear Bush Kit

A

Standard Alignment Kit

SPF3636K

Standard Alignment Settings

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 6 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

B

Steering-Pull Correction Kit

SPF5179K

Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

C

Performance Alignment Kit

SPF3641K

Alignment correction (double-offset) for caster adjustment on both sides. It gives greater steering feel, more steering weight, greater precision, better straight-line stability and better self-centering.

This is a non tyre-wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Was £155.38. Now just £77.69 (inc. VAT)

Only 4 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

8

Anti-Roll Bar Mount To Chassis Bush

SPF3638-19K

19mm available

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

Wheel-alignment required after fitment

9

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC10200

10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

10

Rear Anti-Roll Bar 22mm Non-Adjustable

BFR80

This little bar will liven up the rear end dramatically, eliminate that initial under-steer when entering a corner and provide greater feedback from driver inputs.

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance.

This Whiteline 22mm fixed position Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

What's the best thing about this mod?

It's cheap, simple to install and won't sacrifice ride comfort! Basic tools and an hour to spare are all you need for this little DIY. The only regret you'll have is not having done this mod sooner.

Quantity required: 1

Out of Stock. No longer stocked.

11

Heavy-Duty Adjustable Rear Anti-Roll Bar Links

KLC106

Not many enthusiasts are aware that OE and more importantly aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

Out of Stock. No longer stocked.

12

Beam Axle Mounting Bush Kit

A

Standard 12mm Bolt

SPF5088K

Standard fitment on most cars. Please double-check bolt size as SPF3640K is available should your vehicle have a 16mm bolt.

OEM Part Number: D651-28-460

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

B

16mm Bolt

SPF3640K

OEM Part Number: D651-28-460

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing