Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Bump Stop Bush Kit
SPF4633K
Shortened Upper Bump Stop. Allows more droop travel for lifted vehicles but not to be used with TRC500 or TRC501
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Bump Stops
Fitment Difficulty:
Fitting Time: 1hr
2
Lift Correction Upper Control Arm Kit
Vehicles With Headlight Sensor
TRC501
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms
Fitment Difficulty:
Fitting Time: 3hrs
Shock Absorber Lower Bush Kit
SPF2940PK
Utilises superior Polyelast material for massive increase in durability in all applications.
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
ABS Cable Bracket Extension Kit
SPF4896K
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 1 x Steel Tube, 1 x Bolts, 2 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 30mins
Greasable Shackle and Bushing Kit
KIT0218SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings. These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 1hr
Spring Front Eye Bush Kit
SPF4631K
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs
Greasable Pin and Bush Kit - Front Eye
SPF4459BK
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates
Brake Line Spacer Kit
SPF4954K
For use on lifted vehicles (including Easy-Lift Kit TRC218LK)
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x Brake Line Spacer
Fitment Difficulty:
Fitting Time: 30mins
Related News
- Alex Bones wins Round 1 of the Time Attack series in his Evo 5 RS (Motorsport News)