No Increase in Noise, Vibration or Harshness
Strut Top Spacer Kit
TRC008-6Raises vehicle approximately 10-12mm.
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Wheel-alignment required after fitment
ReadyStrut Top Caps
RS001KControl Arm Lower-Inner Bush Kit
Double Offset
SPF4786KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Wheel-alignment required after fitment
Upper Control Arm Kit for Lifted Vehicles
Adjustable Offset
TRC540These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2-inch lifted vehicle. However, it is important to note that a 2-inch block lift does not necessarily translate to a ride height change of 2 inches (in fact, it's likely to be more due to the way it works). The only way to be sure how much your vehicle has been lifted is for the correct measurements to be taken before and after fitting the lift which should be done as a matter of course when doing any suspension work. If you do not know the before and after measurements, you may need the two bushes mentioned below to correct alignment.
Anything in excess of 2-inches of lift we would recommend fitting double-offset bushes (SPF4784XK) and (SPF4786XK) to achieve optimal alignment settings.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
Key Features
- Increased articulation, perfect for the off road environment
- In-built camber and caster change to suit lifted vehicle
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Steel Tubes
Wheel-alignment required after fitment
Ball Joint Upper Boot Kit
TRC7000RKQuantity required: 2
Only 1 Left In Stock...Hurry!
For immediate despatch.
Shock Absorber Upper Bush Kit
SPF4658KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Wheel-alignment required after fitment
Control Arm Lower-Inner Bush Kit
Double Offset
SPF4786KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Wheel-alignment required after fitment
Sway Bar Mount Bush Kit
34.3mm Bar
SPF3025-34.3KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Greasable Pin and Bush Kit - Front Eye
SPF4461KQuantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates
Spring Shackle Upper Bush Kit
SPF2768KQuantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes