No Increase in Noise, Vibration or Harshness
Front Lower Control Arm Kit
TRC1078Left and right arms for standard replacement / upgrade
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
2
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment Kit
SPF3452KStandard replacement
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 1 x Instruction Sheet, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Steering-Pull Correction Kit
SPF3453KSingle caster offset, approx. 1 degree change. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Sleeves, 6 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Performance Alignment Kit
SPF3454KDouble caster offset, approx. 2 degree change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results.
Quantity required: 1
Was £190.94. Now just £95.47 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 1 x Instruction Sheet, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 1hr 30mins
Left-hand Anti-Roll Bar Link
TRC4036LLHS - Standard Replacement12mm Ball Joint Link
160 degree opposed
Length 300mm center to center
160 degree opposed
Length 300mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 30mins
Right-hand Anti-Roll Bar Link
TRC4036RRHS - Standard Replacement12mm Ball Joint Link
160 degree opposed
Length 300mm center to center
160 degree opposed
Length 300mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 30mins
Related News
- 2007-2013 Nissan X-Trail Lower Front Control Arm Kit (Product News)
Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo





