×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

No Increase in Noise, Vibration or Harshness

Front

1

Front Control Arm Lower, Front Bush Kit

A

To suit 36mm Spring ID

SPF2301K
A technically innovative bush using SuperPro's unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The bushes in this kit have SuperPro's innovative bore knurling which traps grease keeping it in contact with the centre tube, this reduces the need for re-greasing and significantly increases the life of the bush. The kit includes 4 bushes, 2 tubes and assembly grease sufficient components to replace the front lower wishbone bushes on both sides of the car. (To suit 36mm Spring ID)

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

2

Front Anti-Roll Bar Link to Chassis Bush Kit

SPF2092B-4K
Must re-use all original washers.

Used in conjunction with SuperPro's inner anti-roll bar bushes you can transform the handling characteristics of your car by reducing the movement of the anti-roll bar in its mountings. This is caused when old rubber bushes are put under pressure by hard cornering, making them deform. Using SuperPro's polyurethane anti-roll bar bushes will cut this down to a minimum allowing the anti-roll bar to do its job!

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

3

Front Anti Roll Bar to Link 'D' Bush Kit

SPF1117-27K
The forces applied to the anti roll bar on your vehicle while cornering should in an ideal world be directed though the bar itself, however some of the force is inevitably going to be absorbed in deforming the supporting bush. Using our SuperPro polyurethane bushes minimises this effect, allowing the anti roll bar to do its job. This in turn gives your car much sharper and stable handling. These bushes are available for bar sizes 22, 23, 24, 25, 26, 27, 28, 29. We believe most bars are 27mm but please check before ordering.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

Rear

4

Spring Shackle Upper Bush

A

Heavy Duty Option

SPF0187HK
Leaf spring model.

A technically innovative bush using SuperPro's unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The kit includes 4 bushes and assembly grease. These bushes have been treated to SuperPro's 'Bullet Groves' which allows for size variances in the housing while still maintaining a free pivoting of the bushings and reduced noise and vibration.

Quantity required: 1

Only 2 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Related News

Contact your nearest 4X4 specialist

Back to Top