×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Reduce Wear on Suspension Components

Front and Rear

1

Control Arm & Leaf Spring Bush Kit

KIT5163K
No Photo Available
Kit Includes 1 x SPF2301K, 1xSPF2302K, 1xSPF0713K, 1xSPF0192K, 1xSPF0187K

Quantity required: 1

Out of Stock

Contact us for availability.

2

Shock Absorber Bush Kit

KIT5164K
No Photo Available
Shock absorbers and their bushes can have a hard life – especially on off-road vehicles. SuperPro has designed a bush kit to cope with the extra stresses put on these bushes when these vehicles are used on rough terrain. However, they will also work equally well on road going vehicles, outlasting OEM or aftermarket rubber bushes significantly. This kit contains enough components to replace the upper and lower mountings on the front and rear shock absorbers – in one cost effective package.

Quantity required: 1

Out of Stock

Contact us for availability.

Front

3

Control Arm Bush Kit

KIT5163FK
No Photo Available
Kit Includes 1 x SPF2301K, 1xSPF2302K

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

4

Front Control Arm Lower, Front Bush Kit

SPF2301K
A technically innovative bush using SuperPro’s unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The bushes in this kit have SuperPro’s innovative bore knurling which traps grease keeping it in contact with the centre tube, this reduces the need for re-greasing and significantly increases the life of the bush. The kit includes 4 bushes, 2 tubes and assembly grease sufficient components to replace the front lower wishbone bushes on both sides of the car and comes with SuperPro’s unrivalled 3 year/36,000 Mile warranty. (To suit 36mm Spring ID)

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

5

Front Control Arm Lower, Front Bush Kit

SPF1259K
A technically innovative bush using SuperPro’s unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The bushes in this kit have SuperPro’s innovative bore knurling which traps grease keeping it in contact with the centre tube, this reduces the need for re-greasing and significantly increases the life of the bush. The kit includes 2 bushes, 2 tubes and assembly grease sufficient components to replace the front lower wishbone bushes on both sides of the car and comes with SuperPro’s unrivalled 3 year/36,000 Mile warranty. (To suit 40mm Spring ID)

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Wheel-alignment required after fitment

6

Control Arm Lower - Rear Bush

SPF2302K
Do not remove OE shell

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

Wheel-alignment required after fitment

7

Idler Bush

SPF0368K
Excluding V6

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Wheel-alignment required after fitment

8

Front Shock Absorber, Lower Bush Kit

SPF0031K
Shock absorbers and their bushes can have a hard life – especially on off road vehicles. SuperPro has designed a bush kit to cope with the extra stresses put on these bushes when these vehicles are used on rough terrain. However, they will also work equally well on road going vehicles, outlasting OEM or aftermarket rubber bushes significantly.

This bush kit is also available in KIT5164K – Complete shock absorber bush kit.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

9

Front Shock Absorber, Upper Bush Kit

SPF0094K
Pin Mount.

Shock absorbers and their bushes can have a hard life – especially on off road vehicles. SuperPro has designed a bush kit to cope with the extra stresses put on these bushes when these vehicles are used on rough terrain. However, they will also work equally well on road going vehicles, outlasting OEM or aftermarket rubber bushes significantly.

This bush kit is also available in KIT5164K – Complete shock absorber bush kit.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

10

Sway Bar Link To Chassis Bush

SPF2755SK

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

11

Front Anti Roll Bar to Link 'D' Bush Kit

SPF1117-27K
The forces applied to the anti roll bar on your vehicle while cornering should in an ideal world be directed though the bar itself, however some of the force is inevitably going to be absorbed in deforming the supporting bush. Using our SuperPro polyurethane bushes minimises this effect, allowing the anti roll bar to do its job. This in turn gives your car much sharper and stable handling. These bushes are available for bar sizes 22, 23, 24, 25, 26, 27, 28, 29. We believe most bars are 27mm but please check before ordering.

Quantity required: 1

Next Stock Due 14 June 2024

Pre-order now be ensure you get yours.

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

12

Sway Bar To Lower Control Arm Bush

SPF2755SK

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Rear

13

Rear Shock Absorber, Upper and Lower Bush Kit

SPF2178-16K
Shock absorbers and their bushes can have a hard life – especially on off road vehicles. SuperPro has designed a bush kit to cope with the extra stresses put on these bushes when these vehicles are used on rough terrain. However, they will also work equally well on road going vehicles, outlasting OEM or aftermarket rubber bushes significantly.

These bush kits are also available in KIT5164K – Complete shock absorber bush kit.

Quantity required: 2

In Stock

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

14

Spring Bush - All

A

Standard Replacement

KIT0073K
To suit 35mm ID front eye.

The rear spring and shackle bushes are one of the most common failures on the L200. When they are worn they can make the back end of the car very loose which can create handling problems especially when towing a heavy trailer. We have designed this kit so you can buy all the bushes needed to replace the bushes on the rear springs of your car at a competitive price. Superpro Polyurethane bushes are also designed to cope with exposure to Petrol, oil, Diesel, salt, water, ultra-violet light and airborne contaminants which means SuperPro bushes will last significantly longer than OEM or rubber aftermarket bushes - either on or off road.

Quantity required: 1

Only 2 Left In Stock...Hurry!

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs 30mins
Fitting Time icon

B

Heavy Duty Option

KIT0073HK
To suit 35mm ID front eye.

The rear spring and shackle bushes are one of the most common failures on the L200. When they are worn they can make the back end of the car very loose which can create handling problems especially when towing a heavy trailer. We have designed this kit so you can buy all the bushes needed to replace the bushes on the rear springs of your car at a competitive price. Superpro Polyurethane bushes are also designed to cope with exposure to Petrol, oil, Diesel, salt, water, ultra-violet light and airborne contaminants which means SuperPro bushes will last significantly longer than OEM or rubber aftermarket bushes - either on or off road.

Quantity required: 1

Out of Stock

Contact us for availability.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs 30mins
Fitting Time icon

15

Spring Front Eye Bush

A

Standard Replacement

SPF0713K
35mm ID eye.

The rear springs of your car are obviously very important parts and they need to be attached to the car using precision engineered parts. SuperPro’s 25 years of industry leading experience has allowed them to come up with a solution. This bush kit has been engineered to give outstanding performance while coping with the rigours of off road driving and keeping noise and vibration to OEM levels.

This bush kit also available as part of KIT0073K – Rear spring Bush Kit

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

B

Heavy Duty Option

SPF0713HK
35mm ID eye.

The rear springs of your car are obviously very important parts and they need to be attached to the car using precision engineered parts. SuperPro’s 25 years of industry leading experience has allowed them to come up with a solution. This bush kit has been engineered to give outstanding performance while coping with the rigours of off road driving and keeping noise and vibration to OEM levels.

This bush kit also available as part of KIT0073HK – Rear spring Bush Kit

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

16

Spring Rear Eye Bush

A

Standard Replacement

SPF0192K
Leaf spring model.

SuperPro Polyurethane suspension bushes are engineered to provide outstanding performance over any terrain while maintaining reliability. While Improving your vehicles handling and stability, SuperPro bushes will not cause harshness or vibrations which are associated with other manufacturers Polyurethane products. This bush kit has been precision engineered to give outstanding performance and durability on any terrain. These bushes have been treated to SuperPro’s ‘Bullet Groves’ which allows for size variances in the housing while still maintaining a free pivoting of the bushings and reduced noise and vibration.

This bush kit is also available as a part of KIT5177K and KIT0083K

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

B

Heavy Duty Option

SPF0192HK
Leaf spring model.

SuperPro Polyurethane suspension bushes are engineered to provide outstanding performance over any terrain while maintaining reliability. While Improving your vehicles handling and stability, SuperPro bushes will not cause harshness or vibrations which are associated with other manufacturers Polyurethane products. This bush kit has been precision engineered to give outstanding performance and durability on any terrain. These bushes have been treated to SuperPro’s ‘Bullet Groves’ which allows for size variances in the housing while still maintaining a free pivoting of the bushings and reduced noise and vibration.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

17

Spring Shackle Upper Bush

A

Standard Replacement

SPF0187K
Leaf spring model.

A technically innovative bush using SuperPro’s unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The kit includes 4 bushes and assembly grease and comes with SuperPro’s unrivalled 3 year/36,000 Mile warranty. These bushes have been treated to SuperPro’s ‘Bullet Groves’ which allows for size variances in the housing while still maintaining a free pivoting of the bushings and reduced noise and vibration.

This bush kit is also available as a part of KIT5177K and KIT0083K

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

B

Heavy Duty Option

SPF0187HK
Leaf spring model.

A technically innovative bush using SuperPro’s unique design features to provide improved handling and vehicle stability over any terrain. The bush is also designed to last much longer than the cars original rubber bushes, this in turn will also increase the life of other suspension components and tyres. The kit includes 4 bushes and assembly grease and comes with SuperPro’s unrivalled 3 year/36,000 Mile warranty. These bushes have been treated to SuperPro’s ‘Bullet Groves’ which allows for size variances in the housing while still maintaining a free pivoting of the bushings and reduced noise and vibration.

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Related News

Contact your nearest 4X4 specialist

Back to Top