Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
Sway Bar Link Kit - Heavy Duty Adjustable
TRC1045
10mm Ball Joint Adjustable Link, Minimum Length 100 mm - Maximum Length 120 mm
. 25mm long Thread.
2
Control Arm Lower-Inner Rear Bush Kit
Single Offset
SPF4227K
Alignment Correction. 0.5 degrees of Caster adjustment available.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.
5
Control Arm Upper-Inner Bush Kit
Double Offset
SPF2326K
Camber adjustable via offset tube (-1 to +1 degree adjustment). to be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required
Quantity required: 1
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Wheel-alignment required after fitment
6
Control Arm Upper-Outer Bush Kit
Double Offset
SPF2326KCamber adjustable via offset tube (-1 to +1 degree adjustment). to be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required
Quantity required: 1
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Wheel-alignment required after fitment
Toe Control Arm Inner Bush Kit
SPF2325K
Standard Replacement
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Wheel-alignment required after fitment
Toe Control Arm Outer Bush Kit
SPF2325KStandard Replacement
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Wheel-alignment required after fitment
Sway Bar Link Kit - Heavy Duty Adjustable
TRC104510mm Ball Joint Adjustable Link. Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles