×

OR, SELECT YOUR VEHICLE

No Increase in Noise, Vibration or Harshness

Front and Rear

1

Castor Adjustment

KIT0043ADJK
Caster Adjusting Kit. Kit includes SPF0194Kx1, SPF0206Kx1,SPF02509Kx1, SPF0323Kx1,SPF0129Kx1 & SPF0128Kx1 Kit Contains Castor Correction Radius Arm To Axle Bushings

Quantity required: 1

2

Standard Alignment

KIT0043AK
Standard Alignment Kit Bushes to replace front & rear of vehicle. Kit Includes 1xSPF0194K, 1xSPF0206K, 1xSPF0195K, 1xSPF0323K, 1xSPF0129K, 1xSPF0128K. Includes standard alignment Radius Arm to Axle bushings.

Quantity required: 1

Front

3

Radius Arm Bushing Kit

A

Standard Castor & 0.5 Degree Axle Adjustment

KIT5292AK
Kit includes 1 x SPF2717K & 1 x SPF0195K Wide Radius Arm refurbishment kit. Standard Alignment Axle Mount Bushes and alignment correction Chassis Mount bushes for 0.5 Degree Set-back adjustment

Quantity required: 1

B

Standard Castor & 1.0 Degree Axle Adjustment

KIT5292BK
Kit includes 1 x SPF2718K & 1 x SPF0195K Wide Radius Arm refurbishment kit. Standard alignment axle bushes and alignment correction Chassis Mount bushes for 1.0 Degree Set-back adjustment

Quantity required: 1

C

Standard Castor & Standard Axle Alignment

KIT5292K
No Photo Available
Includes SPF0195K & SPF0206K. Wide Radius Arm refurbishment kit. Standard alignment bushes.

Quantity required: 1

D

Castor Correction & 0.5 Degree Axle Adjustment

KIT5246AK
Kit includes 1 x SPF2717K & 1 x SPF2509K Wide Radius Arm refurbishment kit. Offset Axle Mount Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position) and alignment correction Chassis Mount bushes for 0.5 Degree Set-back adjustment

Quantity required: 1

E

Castor Correction & 1.0 Degree Axle Adjustment

KIT5246BK
Kit includes 1 x SPF2718K & 1 x SPF2509K Wide Radius Arm refurbishment kit. Offset Axle Mount Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position) and alignment correction Chassis Mount bushes for 1.0 Degree Set-back adjustment

Quantity required: 1

F

Castor Correction & Standard Axle Alignment

KIT5246K
Kit includes 1 x SPF0206K & 1 x SPF2509K Wide Radius Arm refurbishment kit. Offset Axle Mount Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position).

Quantity required: 1

4

Shock Absorber Lower Bush Kit

SPF0075K
Original Shock Absorber Lower Bush only - Pin Mount.

Featuring a void in the centre of the bush design to allow lateral flexion which reduces stress on the shock absorber - a common cause of shock failure on these vehicles.

OEM Part Number: 552818

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

5

Shock Absorber Upper Bush Kit

SPF0075K
Original shock absorber Upper Bushing Only - Pin Mount

OEM Part Number: 552818

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

6

Sway Bar Link Bush Kit

SPF0078K

OEM Part Number: 5522819

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

7

Sway Bar Mount Bush Kit

SPF0666-25K
30mm bracket width. OEM Bar Diameter 25mm/1" Mounts to suit other diameter bars also available.

OEM Part Number: NTC6828

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

8

Panhard Rod Bush Kit

SPF0194K
To suit 14mm bolt.

OEM Part Number: NRC9728/ANR3410

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

9

Radius Arm To Chassis Mount Bush Kit

A

Standard Use

SPF0206K
Standard replacement kit. For Motorsport use SPF3632K.
Steering pull correction solutions also available - see SPF2717K & SPF2718K

OEM Part Number: NRC4514/ARN6971

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

B

Slight Steering-Pull Correction Kit

SPF2717K
Replacement for SPF0206K To correct slight pull to left. Change of approximately 0.5 degree in setback angle.

OEM Part Number: NRC4514/ARN6971

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

C

Strong Steering-Pull Correction Kit

SPF2718K
Replacement for SPF0206K To correct strong pull to left. Change of approximately 1.0 degree in setback angle.

OEM Part Number: NRC4514/ARN6971

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

D

Radius Arm To Chassis Mount Performance Use

SPF3632K
Alternative to SPF0206K - Performance & Motorsport use only. Standard alignment

OEM Part Number: NRC4514/ARN6971

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet

10

Radius Arm To Axle Bush Kit

A

Standard Alignment

SPF0195K
Crush tube length 54mm No Outer Shell on bushing. Crush tube length 54mm, No Outer Shell on bushing

Quantity required: 1

Kit Includes: 4 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

B

Radius Arm To Axle Bush Kit - Offset for Castor Increase

SPF2509K
Alternative to SPF0195K - Wide Radius Arm, Crush Tube length 54mm, Bush OD 51mm. Offset Bushes for Castor correction. Approx 1.5 to 2 Degrees Castor increase (Fixed position).

OEM Part Number: NTC6860/6781

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Sleeves, 1 x Instruction Sheet

Rear

11

Radius Arm To Axle Mount Bush Kit

SPF0129K

OEM Part Number: NTC1772

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

12

Radius Arm To Chassis Mount Bush Kit

SPF0323K

OEM Part Number: NRC7591/NTC9027

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Plates, 2 x Polyurethane Bushes

13

Trailing Arm Upper Bush Kit

SPF0128K
Upper A Arm to chassis bush

OEM Part Number: NTC1773

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

14

Shock Absorber Lower Bush Kit

SPF0075K
Original shock absorber Lower Bushing Only

OEM Part Number: RNF100090L

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

15

Shock Absorber Upper Bush Kit

SPF0779K
OEM Shock Absorber Upper Mounting. Eye Pattern mounting

OEM Part Number: NRC5593

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

16

Sway Bar Link Bush Kit

SPF0078K

OEM Part Number: 552819

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

17

Rear Sway bar mount to Chassis Bush

SPF2303-18K
4 bolt fixing, 38mm bracket width - OEM Standard Bar size 18mm. Mounts available to suit other bar diameters.

OEM Part Number: NRC5674

Quantity required: 1

Related News

Contact your nearest 4X4 specialist

Back to Top