×

OR, SELECT YOUR VEHICLE

My steering is soo much sharper!

Front and Rear

1

Front & Rear Bush Kit

A

Standard Alignment Kit

KIT5283K
No Photo Available
2WD GTS-T with Hicas. Contains: 1xSPF1483K, 1xSPF0723K, 1xSPF2492K, 1xSPF1202K, 1xSPF2092BK, 1xSPF1484-22K, 1xSPF1639K, 3xSPF1638K, 1xSPF2637K, 1xSPF2687K, 1xSPF0306K, 1xSPF1485-18K

Quantity required: 1

B

Camber-Adjustment Kit

KIT5283ADJK
No Photo Available
2WD GTS-T with Hicas. Contains: 1xSPF1483K, 1xSPF1659K, 1xSPF2492K, 1xSPF1202AK, 1xSPF2092BK, 1xSPF1484-22K, 1xSPF1639K, 1xSPF1638K, 2xSPF1869K, 1xSPF2637K, 1xSPF2687K, 1xSPF0306K, 1xSPF1485-18K

Quantity required: 1

Front

2

Control Arm Lower-Inner Bush

SPF1483K
Stepped shell, 38mm to 40mm 2WD GTS

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves

3

Control Arm Upper-Inner and Outer Bush

A

Standard Alignment Kit

SPF0723K

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes, 8 x Sleeves, 8 x Steel Tubes

B

Camber-Adjustment Kit

SPF1659K
Camber adjusting kit

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes, 4 x Sleeves, 6 x Steel Tubes

4

Steering Rack Mount Bush (Power Steering)

A

BNR32 and HNR32

SPF2681K
BNR32, HNR32

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

B
HCR32, Replaces: Pinion side OE part number 5444-35F00 & Tube side OE part number 5445-71L00 Pinion end on steering rack housing diameter 41.5mm

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

5

Strut Bar To Chassis Mount Bush Kit

A

69.5mm Long Tube and Bracket Width 40mm (Standard Alignment)

SPF1202K
Standard, 69.5mm long tube, Bracket width 40mm

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

B

69.5mm Long Tube and Bracket Width 40mm (Caster-Adjustable)

SPF1202AK
PS & DS Increase or Decrease caster, 69.5 tube, bracket width 40mm

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

C

83mm Long Tube and Bracket Width 54mm (Standard Alignment)

SPF1831K
Standard, Tube 83mm long, Bracket 54mm wide

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes

D

83mm Long Tube and Bracket Width 54mm (Caster-Adjustable)

SPF1831AK
PS & DS Increase or Decrease caster, 83 tube, bracket width 54mm

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

6

Sway Bar Link Bush Kit

SPF2092BK

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

7

Shock Absorber Upper Bushes

SPF3018K
Original Equipment Shock Absorber Only

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Rear

8

Control Arm Lower-Inner Bush

SPF1639K
Remove OE shell

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes

9

Control Arm Upper-Inner and Outer Bush Kit

A

Standard Alignment Kit

SPF1638K
Standard replacement kit "No Adjustment"

Quantity required: 2

Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes

B

Camber-Adjustment Kit

SPF1869K
Inner & outer camber adjustment (eccentric)

Quantity required: 2

Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes

10

Sub Frame Traction Kit

KIT0201K
This kit allows for the rear subframe inclination angle to be changed for performance, traction or drifting. Please refer to the fitting instructions.

Quantity required: 1

11

Cross-member Supplement Washers

A

Small Ring (69.5mm OD)

SPF2687K
Small ring, 69.5mm OD - Circuit Use Only

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

B

Large Ring (80mm OD)

SPF2687K
Large ring, 80mm OD - Circuit Use Only

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

12

Diff To Cross Member Mounting Kit

SPF3775K

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

13

Differential Pin Mount Bushing

A

Re-Uses Original Tubes

SPF2582K
Re-Use Original Inner Tube

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Washer(s) - used for Steel and / or Polyurethane

B

With Replacement Tubes

SPF2637K
Replacement tubes in kit. Front of differential mounting point.

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane, 4 x Polyurethane Bushes

14

Shock Absorber Upper Bushes

SPF3018K
Original Equipment Shock Absorber Only

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

15

Cross-member Insert Enhancement Mounts

SPF2687K

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

16

Sway Bar Link Bush Kit

SPF0306K

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

17

Sway Bar Mount To Axle

SPF1485-16K
To fit 16mm Bar. Measure bar diameter 15,16,18,20,22,24mm available

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Related News

Contact your nearest Nissan specialist

Back to Top