Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
Control Arm Lower-Inner Front Bush Kit
SPF2150K
4WD only
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 3hrs
2
Control Arm Lower-Inner Rear Bush Kit
April 1997 to October 2001
SPF2151K
4/1997 to 10/2001
2WD & 4WD
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
2WD & 4WD
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 3hrs 30mins
Anti-Roll Bar Link
TRC4052
Standard Replacement9.5mm Pin with thread
Length 131mm
Length 131mm
Quantity required: 2
Only 2 Left In Stock...Hurry!
For immediate despatch.
Fitting Time: 30mins
Anti-Roll Bar Link Bush Kit
SPF2092K
Quantity required: 1
In Stock
For immediate despatch.
Kit Includes: 8 x Polyurethane Bushes
Fitting Time: 45mins
5
Anti-Roll Bar Mount Bush Kit
To Suit 19mm Bar
SPF1484-19K
Suits O.E Anti-Roll Bar Sizeavailable Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm
Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system.
Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar.
An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.
Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system.
Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar.
An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitting Time: 45mins
To Suit 21mm Bar
SPF1484-21K
available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm
Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system.
Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar.
An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.
Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system.
Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar.
An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.
Quantity required: 1
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitting Time: 45mins
Greasable Shackle and Bush Kit
KIT0136SK
to suit 4WDContains Greasable Shackles and Fixed Pins with all SuperPro Bushings
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
Quantity required: 1
Only 3 Left In Stock...Hurry!
For immediate despatch.
Fitting Time: 1hr 30mins
Greasable Shackle and Bush Kit - Rear of Spring
KIT0136RSK
to suit 4WDContains Greasable Shackles and SuperPro Bushings
The Shackles are often overlooked when upgrading the suspension of a 4WD.
Original shackles corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the Greasable Shackles and Bush Kit the rear end of a 4WD will lead to a noticeable improvement in ride and handling.
The Shackles are often overlooked when upgrading the suspension of a 4WD.
Original shackles corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the Greasable Shackles and Bush Kit the rear end of a 4WD will lead to a noticeable improvement in ride and handling.
8
Spring Front Eye Bush Kit
2WD Models
SPF0055K
to suit 2WD
Quantity required: 1
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
Fitting Time: 2hrs 30mins