Mitsubishi Challenger PB, PC 2.5 Di-D 4WD Suspension Upgrades

1

Rack Ends

TRC4090

Rack & Pinion Steering Gear. Track Rod End

Quantity required: 2

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 30mins

Wheel-alignment required after fitment

2

Control Arm Lower-Inner Bush Kit

SPF2991K

Remove original shell before fitment

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

3

Control Arm Upper-Inner Bush Kit

SPF2997K

Remove original shell before fitment

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

4

Control Arm Upper Complete Assembly - Fixed Offset

TRC6500

Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

5

Lift Correction Upper Control Arm Kit

A

Vehicles Without Headlight Sensor

TRC500

Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.

Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.

Not suitable for vehicles with Headlight Sensor.

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Key Features:

in-built camber and caster change to suit lifted vehicle
In-built droop increase of approx. 10mm
Increased clearance between spring and Control Arm at full articulation
OE quality ball joint
SuperPro Bushings
Made in Australia

Quantity required: 1

Out of Stock. No longer stocked.

Kit Includes: 2 x Arms

Fitment Difficulty:

Fitting Time: 3hrs

Wheel-alignment required after fitment

6

Strut Top Spacer Kit

TRC008-6

Spacer Sleeve, suspension strut mount.

Raises vehicle approximately 10-12mm.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs 30mins

Wheel-alignment required after fitment

7

ReadyStrut Top Caps

RS004

Strut Cap, Spring Seat, Boot, Nuts & Washers

Quantity required: 1

Out of Stock. No longer stocked.

8

Shock Absorber Lower Bush Kit

SPF2996K

Original shock only

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

9

Shock Absorber Upper Bush Kit

SPF2995K

Bushings located in upper steel mount.
Re-use original washers.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

10

Spring Insulator Pad Bush Kit

SPF2994K

Upper spring seat bushing

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

11

Steering Rack & Pinion Mount Bush (Power Steering)

SPF2992K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

12

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1225

12mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits

6060-T5 Alloy Link
Ball for low friction and long life
Spanner provision for on-car adjustment
Eliminates sway bar link flex
Allows for neutral sway bar positioning
Maximises all positions on adjustable Sway Bars
Suits lowered or raised vehicles

SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

13

Sway Bar Mount Bush Kit

SPF2993-20K

available Sizes 20, 25.4, 27, 28, 30, 31 & 32mm

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

14

Sway Bar Mount Bush Kit

SPF2993-25.4K

available Sizes 20, 25.4, 27, 28, 30, 31 & 32mm

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

15

Top Out Stop Bush Kit

SPF4633K

Shortened Upper Bump Stop

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

16

Panhard Rod Bush Kit

SPF1245K

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

17

Sway Bar Link and Bush Kit

SPF2966BK

165mm total Length, Thread Length each end 65mm
Sway Bar Link and Bush Kit

Quantity required: 1

Out of Stock. No longer stocked.

18

Sway Bar Link Bush Kit

SPF2092BK

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 45mins

19

Sway Bar Mount Bush Kit

SPF0343-22K

available Sizes 16, 18, 20, 22, 23, 24, 25, 26, 27, 28 & 31mm

Quantity required: 1

Was £26.71. Now just £13.36 (inc. VAT)

Only 4 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 45mins

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing