Reduce Tyre Wear
Front Control Arm, Rear Trailing Arm & Panhard Rod Bush Kit
KIT5298KQuantity required: 1
Front Control Arm Bush Kit
KIT5298FKQuantity required: 1
Control Arm Lower - Inner Front Bush
SPF3279KOEM Part Number: 48654-60040
Quantity required: 1
Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes
Control Arm Lower - Inner Rear Bush
SPF3278KOEM Part Number: 48655-60040
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves
Control Arm Upper - Inner Bush Kit
Standard Alignment
SPF3277KOEM Part Number: 48632-60030
Quantity required: 1
Kit Includes: 4 x Steel Tubes, 12 x Washer(s) - used for Steel and / or Polyurethane, 8 x Polyurethane Bushes
Camber-Adjustable
SPF3277XKQuantity required: 1
Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes, 12 x Washer(s) - used for Steel and / or Polyurethane
Control Arm Upper Complete Assembly - Adjustable
TRC485Adjustable up to 4 Degrees increase in Caster and + or - 2 Degrees Camber Adjustment
Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Coil Spring Spacer
Raises Vehicle Approximately 10mm
SPF3281-10KRaises Vehicle Approximately 20mm
SPF3281-20KShock Absorber - Upper Bush
SPF3743KQuantity required: 1
Kit Includes: 4 x Washer(s) - used for Steel and / or Polyurethane, 4 x Polyurethane Bushes
Differential Drop Kit
TRCLC200DDIt is supplied complete with all required spacers, bolts, washers and nuts.
When lifting the 2007 to current 200 Series Land Cruiser, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted.
Quantity required: 1
Kit Includes: 10 x Spacers, 10 x Bolts, 14 x Washer(s) - used for Steel and / or Polyurethane, 2 x Nuts
Steering Rack & Pinion Mount Bush
SPF3770KQuantity required: 1
Kit Includes: 6 x Polyurethane Bushes, 3 x Steel Tubes, 6 x Washer(s) - used for Steel and / or Polyurethane
Anti-Roll Bar Mount To Chassis Bush
Non-KDSS Vehicles
SPF3448-35KKDSS Vehicles
SPF3280-43KAnti-Roll Bar Link Lower Bushing
SPF2147K39mm Extra Heavy Duty Anti-Roll Bar
RC0029F-39Trailing Arm & Panhard Rod Bush Kit
KIT5298RKQuantity required: 1
Panhard Rod Bush
SPF3292KCoil Spring Spacer
Raises Vehicle Approximately 10mm
SPF3287-10KRaises Vehicle Approximately 15mm
SPF3287-15KTrailing Arm - Lower - Bush All
SPF3286KTrailing Arm - Upper - Bush All
SPF3285KAnti-Roll Bar Link Kit - Heavy Duty
TRC0041Quantity required: 1
Kit Includes: 2 x Links, 8 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Extended Anti-Roll Bar Link
TRC4308Suited to KDSS fitted 200 Series Land Cruisers with 50+mm of suspension lift.
The link allows considerably more suspension travel with supporting modifications such as longer shocks and control arms etc and assists with rectification of the “KDSS Lean” as commonly found in the 200 series.
TRC4308 includes a 50mm extension at the sway bar mount pivot, compared to the OE arm, allowing increased suspension travel for 200 Series with KDSS when modified to run long travel shocks (length to be checked & confirmed prior to fitment).
TRC4308 is a direct replacement for the LH rear link – if a RH link is required, use TRC0041.
Anti-Roll Bar Link Lower Bush Kit
SPF2147KAnti-Roll Bar Link Upper Bush Kit
Standard Use
SPF4805-80KQuantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Heavy-Duty Use
SPF4805-90KQuantity required: 1
Kit Includes: 4 x Polyurethane Bushes
Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo

























