Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
1
Front And Rear Suspension Bush Kit
Standard Alignment
KIT0169K
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.
Quantity required: 1
Caster & Camber Adjustable
KIT0170K
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.
Quantity required: 1
2
Control Arm Bush Kit
3
Complete Front Control Arm Kit
18mm Ball Joints - Up to Chassis 260
TRC1135
This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
21mm Ball Joints - From Chassis 261
TRC1136
This front lower control arm kit has been designed to be an easy repair solution.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.
The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.
Quantity required: 1
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
4
Control Arm Lower-Inner Front Bush Kit
5
Control Arm Lower-Inner Rear Bush
Standard Alignment Settings
SPF3368K
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Standard Alignment Settings with Bracket and Bolts
SPF4653K
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.
Steering-Pull Correction Kit
SPF3369K
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes
Performance Alignment Correction Kit
SPF3370K
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush
Quantity required: 1
Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
6
Anti-Roll Bar Mount To Chassis Bush
To Fit Aftermarket Round Bars
SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)
7
Anti-Roll Bar Link Kit
Sway Bar Link
TRC4025
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center
Heavy-Duty Adjustable
TRC10200
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm
Blade Trailing Arm Front Bush
SPF3466K
Do not remove original shell 09/2002-05/2005
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 4hrs
Wheel-alignment required after fitment
Blade Trailing Arm Front Bush
SPF3466KDo not remove original shell
Quantity required: 1
Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes
Toe Control Arm Lower-Inner & Outer Bush Kit
SPF2323K
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Control Arm Lower Inner and Outer Bush
SPF2324K
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
12
Control Arm Upper-Inner Bush Kit
Standard Alignment Kit
SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Performance Alignment Kit
SPF2326K
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required
13
Control Arm Upper-Outer Bush Kit
Standard Alignment Kit
SPF2325KControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Performance Alignment Kit
SPF2326KPrefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
14
Anti-Roll Bar Mount To Chassis Bush
To Fit Aftermarket Round Bars
SPF2141-21KSuits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)
Anti-Roll Bar Link Kit
TRC4002
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center