×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

AbarthAbarth
Alfa RomeoAlfa Romeo
Asia MotorsAsia Motors
Aston MartinAston Martin
AudiAudi
AustinAustin
Austin-HealeyAustin-Healey
BentleyBentley
BMWBMW
ChevroletChevrolet
ChryslerChrysler
CitroenCitroen
DaewooDaewoo
DaihatsuDaihatsu
DaimlerDaimler
DMCDMC
DodgeDodge
FerrariFerrari
FiatFiat
FordFord
GinettaGinetta
HillmanHillman
HoldenHolden
HondaHonda
HummerHummer
HyundaiHyundai
IndigoIndigo
InfinitiInfiniti
IsuzuIsuzu
JaguarJaguar
JeepJeep
JensenJensen
KiaKia
LanciaLancia
Land RoverLand Rover
LDVLDV
LexusLexus
LotusLotus
MahindraMahindra
MaseratiMaserati
MazdaMazda
Mercedes-BenzMercedes-Benz
MGMG
MiniMini
MitsubishiMitsubishi
MorrisMorris
NissanNissan
NobleNoble
OpelOpel
PeugeotPeugeot
PorschePorsche
ProtonProton
ReliantReliant
RenaultRenault
Rootes GroupRootes Group
RoverRover
SaabSaab
SeatSeat
SingerSinger
SkodaSkoda
SmartSmart
SsangyongSsangyong
SubaruSubaru
SunbeamSunbeam
SuzukiSuzuki
TalbotTalbot
TataTata
TeslaTesla
ToyotaToyota
TriumphTriumph
TVRTVR
VauxhallVauxhall
VolkswagenVolkswagen
VolvoVolvo

My steering is soo much sharper!

Front

1

Control Arm Bush Kit

A

Performance Alignment Kit

KIT0171CADJK
No Photo Available
Kit Includes: 1xSPF3370K, 1xSPF3115K

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

2

Complete Front Control Arm Kit

A

18mm Ball Joints - Up to Chassis 260

TRC1135
TRC1135 18mm Ball Joints - Up to Chassis 260
This front lower control arm kit has been designed to be an easy repair solution.

Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.

Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.

The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 260 to 261. Vehicles with Chassis 260 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 261 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1

In Stock

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

3

Control Arm Lower-Inner Front Bush Kit

A

12mm Bolt

SPF2137K
SPF2137K 12mm Bolt
12mm Bolt

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

B

14mm Bolt

SPF3115K
SPF3115K 14mm Bolt
14mm Bolt

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

4

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings with Bracket and Bolts

SPF4653K
SPF4653K Standard Alignment Settings with Bracket and Bolts
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Brackets

B

Performance Alignment Correction Kit

SPF3370K
SPF3370K Performance Alignment Correction Kit
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

5

Anti-Roll Bar Mount To Chassis Bush

A

To Fit Aftermarket Round Bars

SPF2141-21K
SPF2141-21K To Fit Aftermarket Round Bars
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

6

Anti-Roll Bar Link Kit

A

Anti-Roll Bar Link

TRC4025
TRC4025 Anti-Roll Bar Link
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center

Quantity required: 2

In Stock

For immediate despatch.

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Rear

7

Toe Control Arm Lower-Inner & Outer Bush Kit

SPF2323K
SPF2323K Toe Control Arm Lower-Inner & Outer Bush Kit
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Only 4 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

8

Control Arm Lower Inner and Outer Bush

SPF2324K
SPF2324K Control Arm Lower Inner and Outer Bush
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

9

Control Arm Upper-Inner Bush Kit

A

Performance Alignment Kit

SPF2326K
SPF2326K Performance Alignment Kit
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

10

Control Arm Upper-Outer Bush Kit

A

Performance Alignment Kit

SPF2326K
SPF2326K Performance Alignment Kit
Prefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Quantity required: 1

In Stock

For immediate despatch.

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

11

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF2578K
No Photo Available
OE bar with flats at bush mounting point

Quantity required: 1

Only 2 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes

B

To Fit Aftermarket Round Bars

SPF2141-21K
SPF2141-21K To Fit Aftermarket Round Bars
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes

Related News

Where to Buy

Back to Top