4 x Offset bushings & 4 x standard tubes

Alignment Correction. Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2-inch lifted vehicle. However, it is important to note that a 2-inch block lift does not necessarily translate to a ride height change of 2 inches (in fact, it's likely to be more due to the way it works). The only way to be sure how much your vehicle has been lifted is for the correct measurements to be taken before and after fitting the lift which should be done as a matter of course when doing any suspension work. If you do not know the before and after measurements, you may need the two bushes mentioned below to correct alignment.

Anything in excess of 2-inches of lift we would recommend fitting double-offset bushes (SPF4784XK) and (SPF4786XK) to achieve optimal alignment settings.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Key Features

• Increased articulation, perfect for the off road environment
• In-built camber and caster change to suit lifted vehicle
• Provides for camber and caster adjustment using an adjustable ball joint
• Increased clearance between spring and Control Arm at full articulation
• SuperPro Bushings
• Made in Australia

4 x offset bushings & 4 x Standard tubes

Measure sway bar diameter, 33 & 34.3mm available