Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
1
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment Kit
SPF2100K
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.Standard Settings
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Some Hyundai/Kia models may require a 70mm OD Bush.Standard Settings
Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3776K
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs
Steering-Pull Correction Kit
SPF2101K
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.
0.5 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Some Hyundai/Kia models may require a 70mm OD Bush.
0.5 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment
Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3808K.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Performance Alignment Kit
SPF2102K
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush.
1 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment
Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3809K.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Some Hyundai/Kia models may require a 70mm OD Bush.
1 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment
Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3809K.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 2hrs 30mins
2
Sway Bar Mount Bush Kit
To Fit 25mm Bar
SPF2328-25K
Measure bar diameter 25,27mm available, Replaces OEM 5481339100
OEM Part Number: 5481339100
Quantity required: 1
Was £40.79. Now just £20.40 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Sleeves
Fitment Difficulty:
Fitting Time: 1hr
To Fit 27mm Bar
SPF2328-27KMeasure bar diameter 25,27mm available, Replaces OEM 5481339100
OEM Part Number: 5481339100
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar To Lower Control Arm Bush Kit
SPF2092BK
End link
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 45mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC10105
10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF2329-16K
Measure bar diameter 11,16mm available, Rep OEM 5557738600
OEM Part Number: 5557738600
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr