Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
Control Arm Lower-Inner Front Bush Kit
SPF4099K
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Control Arm Lower-Inner Rear Bush Kit
SPF4477K
Standard replacement
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins
Control Arm Lower-Inner Rear Bush Kit - Double Offset
SPF4479K
Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins
Control Arm Lower-Inner Rear Bush Kit - Single Offset
SPF4478K
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Sway Bar Link Kit - Heavy Duty Adjustable
TRC12200
12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Lateral Arm Front-Inner Bush Kit
SPF1947-2K
Quantity required: 1
Was £49.73. Now just £24.86 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 2hrs
Lateral Arm Front-Outer Bush Kit
SPF3880K
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 3hrs
Lateral Arm Rear-Outer Bush Kit
SPF3880KInner bushing is a Hyme Joint
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 3hrs
Sway Bar Link
TRC4004
Cut To Length Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm
Minimum Length 80mm - Maximum Length 320mm
Quantity required: 2
Next Stock Due 12 April 2024
Pre-order now be ensure you get yours.
Fitting Time: 30mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC10105
10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF2284-16K
available Sizes 14, 15, 16, 17 & 20mm
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 1hr
Trailing Arm Lower-Front Bush Kit
SPF4609K
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs
Trailing Arm Lower-Rear Bush Kit
SPF4609KBushing located in the Hub Assembly
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs