×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

No Increase in Noise, Vibration or Harshness

Front and Rear

1

Enhancement Bush Kit

KIT5236K
Kit Content: SPF4690K x 1, SPF4346K x 1, SPF2845K x 1, SPF2836K x 1, SPF2461K x 2, SPF1760K x 2

Quantity required: 1

Out of Stock

Contact us for availability.

Front

2

33mm Heavy Duty 2 Position Blade Adjustable Sway Bar

RC0081FZ-33
SuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.

Upgrading the front Sway Bars will
  • Improve the stability by compensating for the change in centre of gravity of the chassis
  • Increase tyre life
  • Control body roll in load carrying and towing applications
  • Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

Fitting Time: 2hrs
Fitting Time icon

3

Ball Joint Upper Boot Kit

TRC7000RK
No Photo Available
Kit includes Boot and Cir Clips for one Control Arm
repair kit for SuperPro Roll Control arms only

Quantity required: 2

Only 2 Left In Stock...Hurry!

For immediate despatch.

Fitting Time: 30mins
Fitting Time icon

4

Control Arm Lower Camber Bolt Kit

TRC0031
Complete set of replacement Camber Bolts

Quantity required: 1

Only 3 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Bolts, 4 x Nuts, 4 x Washers

Fitting Time: 2hrs
Fitting Time icon

5

Control Arm Lower Complete Assembly Kit - Offset

TRC476
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction
0.6 Degrees of Camber Adjustment
Alignment Correction

Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins.
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
  • Two Complete Arm Assemblies
  • All SuperPro Bushings pre-installed
  • Re-designed and Up-rated Ball Joints
  • Up-rated Camber Bolts for four positions
  • Camber increase version is ideally suited to a lifted vehicle

    Quantity required: 1

    Next Stock Due 14 June 2024

    Pre-order now be ensure you get yours.

    Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Pins

    Fitting Time: 2hrs 30mins
    Fitting Time icon

    6

    Control Arm Lower Complete Assembly Kit - Standard

    TRC475
    Left and Right Arms for Standard Replacement and Repair UpgradeComplete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins
    The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
    The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
    • Two Complete Arm Assemblies
    • All SuperPro Bushings pre-installed
    • Re-designed and Up-rated Ball Joints
    • Up-rated Camber Bolts for four positions

    Quantity required: 1

    Only 1 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Pins

    Fitting Time: 2hrs 30mins
    Fitting Time icon

    7

    Control Arm Lower-Inner Front Bush Kit

    SPF5028K
    Standard replacement
    Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
    Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
    SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

    Quantity required: 1

    Only 4 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

    Fitting Time: 3hrs 30mins
    Fitting Time icon

    8

    Control Arm Lower-Inner Front Offset Kit

    SPF5028XK
    Alignment Correction

    Camber and Caster Adjustable
    Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
    Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
    SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver.

    Quantity required: 1

    Only 2 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

    Fitting Time: 3hrs 30mins
    Fitting Time icon

    9

    Control Arm Lower-Inner Rear Bush Kit

    SPF5027K
    Standard replacement
    Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
    Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
    SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

    Quantity required: 1

    Only 4 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

    Fitting Time: 3hrs 30mins
    Fitting Time icon

    10

    Control Arm Lower-Inner Rear Offset Kit

    SPF5027XK
    Alignment Correction

    Camber and Caster Adjustable
    Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
    Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
    SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver.

    Quantity required: 1

    Only 2 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

    Fitting Time: 3hrs 30mins
    Fitting Time icon

    11

    Control Arm Upper Complete Assembly - Adjustable

    TRC470
    Left and Right Arms for Lifted Vehicles with Caster and Camber Correction
    +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
    These arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
    Getting the correct alignment is no longer a problem.
    Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
    These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

    Key Features
    • Increased articulation, perfect for the off road environment
    • Provides for camber and caster adjustment using an adjustable ball joint
    • Increased clearance between spring and Control Arm at full articulation
    • SuperPro Bushings
    • Made in Australia

    Quantity required: 1

    Only 1 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Steel Tubes

    Fitting Time: 3hrs
    Fitting Time icon

    12

    Control Arm Upper Complete Assembly - Fixed Offset

    TRC6470
    Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction
    providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
    Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
    These arms fitted with Heavy Ball joints and SuperPro Bushes to reduce Arm movement.
     
    Getting the correct alignment is no longer a problem.
    The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5�). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm.
     
    Key Features
    • Fixed offset alignment correction arms
    • In-built camber and caster change to suit lifted vehicle
    • Increased clearance between spring and Control Arm at full articulation
    • Heavy Duty ball joint
    • SuperPro Bushings

    Quantity required: 1

    Out of Stock

    Contact us for availability.

    Fitting Time: 3hrs
    Fitting Time icon

    13

    Control Arm Upper-Inner Bush Kit - Alignment Correction

    SPF3230K
    Camber Adjustable
    0.5 to 1 Degree of Camber Adjustment
    An "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle.
    By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.

    Quantity required: 1

    Only 4 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane

    Fitting Time: 4hrs
    Fitting Time icon

    14

    Control Arm Upper-Inner Bush Kit - Standard Replacement

    SPF2845K
    Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
    Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
    SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

    Quantity required: 1

    Only 3 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane

    Fitting Time: 4hrs
    Fitting Time icon

    15

    ReadyStrut Top Caps

    RS002
    Strut Cap, Spring Seat, Nuts & Washers

    Quantity required: 2

    Out of Stock

    Contact us for availability.

    Kit Includes: 1 x Strut Top Cap

    Fitting Time: 1hr
    Fitting Time icon

    16

    Shock Absorber Lower Bush Kit

    SPF2348PK
    Will not fit Koni & EFS ShocksUtilises superior SuperPro Hybrid material for massive increase in durability in all applications.

    Quantity required: 1

    Out of Stock

    Contact us for availability.

    Kit Includes: 2 x Polyurethane Bushes

    Fitting Time: 2hrs
    Fitting Time icon

    17

    Shock Absorber Upper Bush Kit

    SPF3757K

    Quantity required: 1

    Only 1 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 4 x Polyurethane Bushes

    Fitting Time: 2hrs 30mins
    Fitting Time icon

    18

    Steering Rack & Pinion Mount Bush (Power Steering)

    SPF3144K
    Suits O.E Rack only

    Quantity required: 1

    In Stock

    For immediate despatch.

    Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Washer(s) - used for Steel and / or Polyurethane

    Fitting Time: 3hrs
    Fitting Time icon

    19

    Sway Bar Link

    TRC4017L
    LHS - Standard Replacement12mm Ball Joint Link

    85 Degree opposed

    Length 140mm center to center

    Quantity required: 1

    Only 4 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 1 x Link

    Fitting Time: 30mins
    Fitting Time icon

    20

    Sway Bar Link

    TRC4017R
    RHS - Standard Replacement12mm Ball Joint Link

    85 Degree opposed

    Length 140mm center to center

    Quantity required: 1

    Only 3 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 1 x Link

    Fitting Time: 30mins
    Fitting Time icon

    21

    Sway Bar Mount Bush Kit

    SPF2506-29K
    available Sizes: 19, 20, 28, 29 & 30 mm

    Quantity required: 1

    Next Stock Due 05 July 2024

    Pre-order now be ensure you get yours.

    Kit Includes: 2 x Polyurethane Bushes

    Fitting Time: 1hr
    Fitting Time icon

    Rear

    22

    24mm Heavy Duty 3 Position Blade Adjustable Sway Bar

    RC0078RZ-24
    SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
    The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
    If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.

    Upgrading to Roll Control Sway Bars will:
    • Improve the stability by compensating for the change in centre of gravity of the chassis
    • Neutralise the factory understeer
    • Increase tyre life
    • Control the roll in load carrying and towing applications
    • Improve safety with no loss of comfort or articulation
    SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package

    Quantity required: 1

    Out of Stock

    Contact us for availability.

    Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

    Fitting Time: 1hr
    Fitting Time icon

    23

    Panhard Rod Bush Kit

    SPF2836K
    Replaces both ends of the bar

    Quantity required: 1

    In Stock

    For immediate despatch.

    Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

    Fitting Time: 2hrs
    Fitting Time icon

    24

    Sway Bar Mount Bush Kit

    SPF1487-21K
    available Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm

    Quantity required: 1

    Only 1 Left In Stock...Hurry!

    For immediate despatch.

    Kit Includes: 2 x Polyurethane Bushes

    Fitting Time: 45mins
    Fitting Time icon

    25

    Trailing Arm & Panhard Rod Bush kit

    KIT5236RK
    Kit Content: SPF2836K x 1, SPF2461K x 2, SPF1760K x 2

    Quantity required: 1

    Out of Stock

    Contact us for availability.

    26

    Trailing Arm Upper Bush Kit

    SPF1760K

    Quantity required: 2

    Next Stock Due 27 September 2024

    Pre-order now be ensure you get yours.

    Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

    Fitting Time: 2hrs 30mins
    Fitting Time icon

    Related News

    Contact your nearest 4X4 specialist

    Back to Top