Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Improve Directional Stability
Engine Pitch Stop Mount Upgrade
KDT973
The pitch stop mount to assist in controlling the engine and drivetrain forward and aft twisting motion. The pitch stop is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's pitch stop mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Quantity required: 1
Out of Stock. No longer stocked.
-25mm Progressive Rate Lowering Spring Kit
WSK-HYU001
Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. This kit contains 2.4kg/mm (134lb/in) front-rated springs that provide a 25mm drop, while the 2.0kg/mm (112lb/in) rated rears deliver a desirable 25mm to the vehicle. By lowering the vehicle's centre of gravity, the unique and progressive rate coil design not only improves performance but enhance overall appearance. Developed and manufactured in Europe from the highest quality materials, coating, and the finest tolerances guaranteeing exact fitment. Whiteline Springs are engineered for optimal balance with OEM and aftermarket shocks.
Quantity required: 1
Out of Stock. No longer stocked.
Extra Camber Front Strut Mounts
KCA478
Whiteline offset strut tops allow extra negative camber and positive caster to improve steering response, steering feel and reduced movement to ensure wheel alignment stability through a high-quality spherical bearing. Perfect for the high-performance street or track day weapon, providing improved tyre life and extra grip during high-speed / high-load cornering. Providing an addition +1.0 Deg of caster / -1.0 Deg of camber. IMPORTANT -Â suits aftermarket shocks and coilovers.
Quantity required: 1
Out of Stock. No longer stocked.
Front Roll centre/bump steer - correction kit
KCA485
A must for lowered vehicles, Whiteline roll centre and bump steer correction kit is designed to correct roll-centre geometry using specially engineered ball joints. Raising the front roll-centre results in a substantial increase in front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact, ultimately improving front-end grip, cornering speeds and tyre life when driving the vehicle to its potential.
Quantity required: 1
Out of Stock. No longer stocked.
Heavy-Duty Adjustable Front Anti-Roll Bar Links
TRC12200
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
24mm Heavy-Duty 2-Position Blade Adjustable Front Anti-Roll Bar
RC0107FZ-24
If you're looking for increased cornering capabilities with decreased body roll, SuperPro's Roll Control anti-roll bars are the answer!
By being adjustable, the anti-roll bar rates can be increased between 30-50% over OE anti-roll bars by simply changing the end link position - which means you can get the perfect balance depending on your usage requirements.
By being adjustable, the anti-roll bar rates can be increased between 30-50% over OE anti-roll bars by simply changing the end link position - which means you can get the perfect balance depending on your usage requirements.
Quantity required: 1
Now just £130.68 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 5hrs
Control Arm Lower-Front Bush Kit
SPF4383K
Quantity required: 1
Was £63.58. Now just £31.79 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
8
Control Arm Lower-Rear Bush Kit
Standard Alignment Kit
SPF3776K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Was £159.98. Now just £79.99 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Fitment Difficulty:
Fitting Time: 3hrs
Steering-Pull Correction Kit
SPF3808K
Single-offset to increase caster by up to 1 Degree on one side of the vehicle.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Was £159.98. Now just £79.99 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Fitment Difficulty:
Fitting Time: 3hrs
Performance Alignment Kit
SPF3809K
Double-Offset for caster increase and 2 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Now just £39.60 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 4 x Spacers
Fitment Difficulty:
Fitting Time: 3hrs
Engine Steady Mount Bush Kit
SPF3936K
Quantity required: 2
Out of Stock. No longer stocked.
Fitment Difficulty:
Engine Steady Mount Bush Kit
SPF3937K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Rear Adjustable Camber Arms
KTA282
Heavy-duty turnbuckle adjustable control arms provide incremental on-car adjustability of camber alignment. This results in improved traction, increased cornering grip, and better tire life - ultimately improving overall performance.
Quantity required: 1
Out of Stock. No longer stocked.
22mm Heavy-Duty 2-Position Blade Adjustable Rear Anti-Roll Bar
RC0107RZ-22
If you're looking for increased cornering capabilities with decreased body roll, SuperPro's Roll Control anti-roll bars are the answer!
By being adjustable, the anti-roll bar rates can be increased between 30-50% over OE anti-roll bars by simply changing the end link position - which means you can get the perfect balance depending on your usage requirements.
By being adjustable, the anti-roll bar rates can be increased between 30-50% over OE anti-roll bars by simply changing the end link position - which means you can get the perfect balance depending on your usage requirements.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr