Proton Persona C9M 313i Suspension Upgrades

1

Camber Adjusting Bolt Kit

SPF4351-12K

Adds +/- 1.5 Degrees camberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

2

Control Arm Lower-Front Bush Kit

SPF1160K

Crush Tube 16 x 12 x 60

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitting Time: 2hrs 30mins

3

Control Arm Lower-Inner Rear Bush Kit

SPF1500K

Standard replacement

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitting Time: 2hrs 30mins

4

Control Arm Lower-Inner Rear Bush Kit

SPF1502K

Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitting Time: 2hrs 30mins

5

Control Arm Lower-Inner Rear Bush Kit

SPF1502XK

Anti Lift & Caster Increase

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitting Time: 2hrs 30mins

6

Control Arm Lower-Inner Rear Bush Kit - Double Offset

SPF1502AK

Alignment Correction for Performance
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitting Time: 2hrs 30mins

7

Control Arm Lower-Inner Rear Bush Kit - Single Offset

SPF1501K

Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitting Time: 2hrs 30mins

8