Reduce Tyre Wear
Control Arm Lower Inner-Rear Bush Kit
SPF4695KStandard Replacement
Quantity required: 1
Was £261.23. Now just £130.62 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
Fitting Time: 2hrs 30mins

Control Arm Lower Inner-Rear Bush Kit - Double Offset
SPF4700KAlignment Correction. Caster Adjustment
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Was £261.23. Now just £130.62 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Fitting Time: 2hrs 30mins

Control Arm Lower Inner-Rear Bush Kit - Single Offset
SPF4699KAlignment Correction. Use this kit to correct a slight pull
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Fitting Time: 2hrs 30mins

Control Arm Lower-Inner Front Bush Kit
SPF4694KQuantity required: 1
Was £166.56. Now just £83.28 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Steel Tubes
Fitting Time: 2hrs 30mins

Sway Bar Link
TRC4004Cut To Length Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm
Minimum Length 80mm - Maximum Length 320mm
Quantity required: 2
Next Stock Due 12 April 2024
Pre-order now be ensure you get yours.
Fitting Time: 30mins

Sway Bar Link
TRC4025Standard Replacement10mm Ball Joint Link
180 Degree opposed
Length 300mm center to center
180 Degree opposed
Length 300mm center to center
Quantity required: 2
Was £34.92. Now just £17.46 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 1 x Link
Fitting Time: 30mins
