Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
No Increase in Noise, Vibration or Harshness
Enhancement Bush Kit
KIT0242K
As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on this vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised.
With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle.
As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues.
As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms.
Kit contains:
With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle.
As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues.
As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms.
Kit contains:
- Front Control Arm Lower Bush Kit
- Front Control Arm Upper Bush Kit
- Front Steering Rack & Pinion Mount Bush
- Rear Panhard Rod Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 8hrs
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
30mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0059FZ-30
will not fit KDSS vehiclesSuperPro Roll Control Rear Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Control Arm Lower Bush Kit
SPF4051K
This Kit does both Front & Rear Bushings of the Lower Arm
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 4hrs
Control Arm Lower Complete Assembly Kit - Standard
TRC483
Left and Right Arms for Standard Replacement and Repair Upgrade
Suits Vehicles without KDSSArms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
TRC483 - Standard Replacement
Suits Vehicles without KDSSArms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
TRC483 - Standard Replacement
- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Up-rated Ball Joints
- Improved Quality replacement Camber Bolts
The perfect replacement for your worn ball joints, worn bushes and seized camber pins!
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Control Arm Upper Complete Assembly - Adjustable
TRC480
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction
+/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
+/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
7
Control Arm Upper-Inner Bush Kit
Standard Alignment
SPF2845K
Standard replacement
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Remove original shell for fitmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 4hrs
Double-Offset Alignment Correction
SPF3230K
Alignment Correction
Camber Adjustable
0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Camber Adjustable
0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Was £306.83. Now just £153.42 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 4hrs
ReadyStrut Top Caps
RS002
Strut Cap, Spring Seat, Nuts & Washers
Quantity required: 2
Out of Stock. No longer stocked.
Steering Rack & Pinion Mount Bush Kit
SPF4056K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Anti-Roll Bar Link
TRC4017L
LHS - Standard Replacement12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center
85 Degree opposed
Length 140mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 30mins
Anti-Roll Bar Link
TRC4017R
RHS - Standard Replacement12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center
85 Degree opposed
Length 140mm center to center
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 30mins
Anti-Roll Bar Link Kit - Heavy Duty Adjustable
TRC1285L
12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm
Features & Benefits
Minimum Length 140 mm - Maximum Length 170 mm
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
24mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0059RZ-24
will not fit KDSS vehicles. SuperPro Roll Control Rear Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Panhard Rod Bush Kit
SPF2836K
Replaces both ends of the bar
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
15
Anti-Roll Bar Link Kit
Standard Replacement
TRC4040
Standard Replacement12mm Ball Joint/Bush Link
128mm center to center
128mm center to center
Quantity required: 2
Out of Stock. No longer stocked.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Heavy-Duty Extended
TRC4307
SuperPro Heavy Duty Extended Thread Anti-Roll Bar Links are designed and manufactured to suit lifted Vehicles from 2-8". They are designed to allow you to effectively trim the Anti-Roll Bar Link to your desired length to provide adequate tail shaft clearance and Anti-Roll Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Anti-Roll Bar Links offer increased strength and stud articulation, providing for less stress on the Anti-Roll Bar links during wheel articulation.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Anti-Roll Bar Links offer increased strength and stud articulation, providing for less stress on the Anti-Roll Bar links during wheel articulation.
Quantity required: 2
Out of Stock. No longer stocked.
Kit Includes: 1 x Link
Heavy-Duty Adjustable
TRC1285V
12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint
Minimum Length 165 mm - Maximum Length 210 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 165 mm - Maximum Length 210 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 30mins
16
Anti-Roll Bar Mount Bush Kit
To Fit 18mm Bar
SPF4059-18K
Suits OE Bar Sizeavailable Sizes 18, 20, 25 & 27mm
Quantity required: 1
Was £36.25. Now just £18.13 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
To Fit 20mm Bar
SPF4059-20K
available Sizes 18, 20, 25 & 27mm
Quantity required: 1
Was £45.48. Now just £22.74 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
To Fit 25mm Bar
SPF4059-25K
available Sizes 18, 20, 25 & 27mm
Quantity required: 1
Was £45.48. Now just £22.74 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
To Fit 27mm Bar
SPF4059-27K
available Sizes 18, 20, 25 & 27mm
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
Trailing Arm Lower Bush Kit
SPF2461K
Quantity required: 2
Was £88.51. Now just £44.26 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Trailing Arm Upper Bush Kit
SPF1760K
Replaces both ends of the bar
Quantity required: 2
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins