Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
No Increase in Noise, Vibration or Harshness
Complete Front Lower Control Arm Assembly Kit
TRC1100
SuperPro repair/upgrade arms supplied with ball joints and SuperPro bushes pre-fitted.
Our front lower control arm kit for the Toyota Yaris & Prius has been designed to be an easy repair / upgrade solution.
Offering both alignment and vehicle handling improvements.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market.
These arms utilise the SuperPro bushings and are manufactured from a high-strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Our front lower control arm kit for the Toyota Yaris & Prius has been designed to be an easy repair / upgrade solution.
Offering both alignment and vehicle handling improvements.
Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market.
These arms utilise the SuperPro bushings and are manufactured from a high-strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Wheel-alignment required after fitment
Camber Adjusting Bolt Kit
SPF4351-15K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm
Quantity required: 1
Out of Stock. No longer stocked.
Control Arm Lower-Front Bush Kit
SPF3511K
Quantity required: 1
Was £64.91. Now just £32.46 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
4
Control Arm Lower-Rear Bush Kit
Standard Alignment
SPF4049K
Standard replacement
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Steering-Pull Correction
SPF4046K
Alignment Correction. Use this kit to correct a slight pull
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Performance Alignment
SPF4045K
Alignment Correction. Caster Adjustment
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 4 x Spacers, 2 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
5
Sway Bar Link Kit
Standard Replacement
TRC4033
Standard Replacement12mm Ball Joint Link
180 degree opposed
Length 360mm center to center
180 degree opposed
Length 360mm center to center
Quantity required: 2
Out of Stock. No longer stocked.
Kit Includes: 1 x Link
Fitment Difficulty:
Fitting Time: 30mins
Heavy Duty-Adjustable
TRC12265
12mm Ball Joint Adjustable Link
Minimum Length 320 mm - Maximum Length 365 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 320 mm - Maximum Length 365 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Links
Fitment Difficulty:
Fitting Time: 1hr