×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

My steering is soo much sharper!

Front

1

Front Control Arm Lower-Front Bush Kit

SPF4008K
This bushing kit controls the fore and aft movement of the front control arm. SuperPro recommends it be replaced at the same time as the rear bushing. Note: re-use OE washers.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

2

Front Control Arm Lower-Rear Bush Kit

SPF4010K
This bushing kit controls the lateral movement of the front control arm.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes

3

Front Control Arm Upper-Inner Bush Kit

SPF4944K
This bushing kit stabilises the movement of the front hub assembly and is critical in maintaining wheel alignment during cornering, braking and acceleration.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

4

Shock Mount Lower Bush Kit

SPF4924K
Properly functioning shock bushes ensure the first movement of the suspension is controlled by damper and spring, not the â??slackâ?? in a OE style bush.

Quantity required: 1

Out of Stock

Contact us for availability.

5

Anti-Roll Bar Mount Bush Kit

A

Petrol Models (not SRT)

SPF4764-33K
suits Petrol Modelsavailable Sizes 33, 34 & 38mm Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system. Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar. An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.

Quantity required: 1

In Stock

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

B

Diesel Models

SPF4764-34K
suits Diesel Modelsavailable Sizes 33, 34 & 38mm Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system. Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar. An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.

Quantity required: 1

Out of Stock

Contact us for availability.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

C

SRT Models

SPF4764-38K
suits SRT Modelsavailable Sizes 33, 34 & 38mm Anti-Roll Bar mount bushes are an important part of the whole Anti-Roll Bar system. Worn or rubber bushes in these locations lead to movement in the Anti-Roll Bar in unwanted directions that effect the effectiveness of the Anti-Roll Bar. An upgrade to SuperPro bushings can return lost Anti-Roll Bar performance and improve handling.

Quantity required: 1

In Stock

For immediate despatch.

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

Rear

6

Rear Control Arm Lower-Inner Bush Kit

SPF4978K
This bushing controls lateral movement of the rear lower control arm and is a critical position to control tyre wear.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes

7

Rear Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF5210K
Being located in a camber arm, this bushing along with SPF5214K are instrumental in controlling dynamic camber changes while cornering. This upgrade helps maintain the correct tyre contact angle to maintain traction.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

B

Offset Camber Adjustable Kit

SPF5210XK
This kit is designed to decrease negative camber on lowered vehicles. Expect 1.5°-2° Camber change.

Quantity required: 1

Out of Stock

Contact us for availability.

8

Rear Control Arm Upper-Outer Bush Kit

SPF5214K
Being located in a camber arm, this bushing, along with SPF5210K, are instrumental in controlling dynamic camber changes while cornering. This helps maintain the correct tyre contact angle to maintain traction.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

9

Rear Differential Mount Bush Kit

SPF4628K
SuperPro hybrid bushings dramatically improve the mounting system of the differential. Reducing pinion angle changes during acceleration for smoother, more efficient power transfer through the drivetrain system.

Quantity required: 1

Only 1 Left In Stock...Hurry!

For immediate despatch.

Kit Includes: 3 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

10

Rear Lateral (Toe) Arm Bush Kit

SPF4922K
Controlling toe in and toe out in the rear under braking and acceleration maintains traction and prolongs tyre life.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 8 x Polyurethane Bushes, 4 x Steel Tubes

11

Rear Leading Arm Front Bush Kit

SPF5211K
The leading arm is critical for controlling fore and aft movement. It forms a triangle with the control arm to further stabilise the lower control arm. Replacing this bushing when replacing the lower control arm bushings improves the integrity of this system.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

12

Rear Leading Arm Rear Bush Kit

SPF5214K
The leading arm is critical for controlling fore and aft movement. It forms a triangle with the control arm to further stabilise the lower control arm. Replacing this bushing when replacing the lower control arm bushings improves the integrity of this system.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

13

Rear Shock Mount Lower Bush Kit

SPF4943K
Properly functioning shock bushes ensure the first movement of the suspension is controlled by damper and spring, not the â??slackâ?? in a OE style bush.

Quantity required: 1

Out of Stock

Contact us for availability.

Kit Includes: 2 x Polyurethane Bushes

Contact your nearest 4X4 specialist

Back to Top