×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Reduce Tyre Wear

Front and Rear

1

Front And Rear Suspension Bush Kit

A

Standard Alignment

KIT0169K
Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.

Quantity required: 1

B

Caster & Camber Adjustable

KIT0170K
Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.

Quantity required: 1

Front

2

Control Arm Bush Kit

A

Standard Alignment Kit

KIT0171K
Kit Includes: 1xSPF3368K, 1xSPF3115K

Quantity required: 1

B

Performance Alignment Kit

KIT0171CADJK
No Photo Available
Kit Includes: 1xSPF3370K, 1xSPF3115K

Quantity required: 1

3

Complete Front Control Arm Kit

A

18mm Ball Joints - Up to Chassis 260

TRC1135
This front lower control arm kit has been designed to be an easy repair solution.

Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.

Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.

The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

B

21mm Ball Joints - From Chassis 261

TRC1136
This front lower control arm kit has been designed to be an easy repair solution.

Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade.

Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market.

The Volvo C30 front control arms were changed by the manufacturer around the change from Chassis number 209290 to 209291. Vehicles with Chassis 209290 or lower will most likely have 18mm ball joints which the TRC1135 is designed to replace. However, we recommend measuring your ball joints to make sure you order the correct ones. Vehicles with Chassis 209291 and later are likely to feature larger 21mm ball joints so you would need to fit TRC1136 instead.

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs
Fitting Time icon

Wheel-alignment required after fitment

4

Control Arm Lower-Inner Front Bush Kit

A

12mm Bolt

SPF2137K
12mm Bolt

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

B

14mm Bolt

SPF3115-90K
14mm Bolt

Quantity required: 1

5

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings

SPF3368K
Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

B

Standard Alignment Settings with Bracket and Bolts

SPF4653K
Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1

Kit Includes: 2 x Brackets

C

Steering-Pull Correction Kit

SPF3369K
1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes

D

Performance Alignment Correction Kit

SPF3370K
2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

6

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF3114-20K
OE bar with flats at bush mounting point

Quantity required: 1

B

To Fit Aftermarket Round Bars

SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

7

Anti-Roll Bar Link Kit

A

Cut-To-Length Link

TRC4004
10mm Ball Joint. Minimum length 80mm - maximum length 320mm

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

B

Sway Bar Link

TRC4025
Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

C

Heavy-Duty Adjustable

TRC10200
10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

8

Blade Trailing Arm Front Bush

SPF3466K
Do not remove original shell 09/2002-05/2005

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

Wheel-alignment required after fitment

9

Blade Trailing Arm Front Bush

SPF3466K
Do not remove original shell

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

10

Toe Control Arm Lower-Inner & Outer Bush Kit

SPF2323K
Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

11

Control Arm Lower Inner and Outer Bush

SPF2324K
Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

12

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K
1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required

Quantity required: 1

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

13

Control Arm Upper-Outer Bush Kit

A

Standard Alignment Kit

SPF2325K
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K
Prefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Quantity required: 1

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

14

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF2578K
No Photo Available
OE bar with flats at bush mounting point

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

B

To Fit Aftermarket Round Bars

SPF2141-21K
Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

15

Anti-Roll Bar Link Kit

TRC4002
Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center

Quantity required: 2

Kit Includes: 1 x Link

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

Related News

Where to Buy

Back to Top