Ford Falcon FG 5.4 i V8 XR8 Suspension Upgrades

1

33mm Extra Heavy Duty Non Adjustable Sway Bar

The Ultimate Handling Package!
Fitting larger sway bars has two main effects on:

Vehicle balance in terms of understeer and oversteer
Increased roll resistance Both these effects provide increased tyre contact and grip for a vehicle.

Add in the SuperPro Adjustable sway bar links to:

Eliminate sway bar link flex
Adjust in neutral sway bar positioning
Maximize all positions on the adjustable Sway Bars

All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle!
From our testing, this is what we recommend as a good starting point:

Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.

SuperPro Roll Control Sway Bars will make the suspension system and tyres perform better and the car will be more responsive while delivering better turn in and control through corners.

It is the best dollar for dollar handling improvement you can make!

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

2

Bump Stop Bush Kit

SPF2044K

2 x Bump Stops & 2 x Caps per Kit

50mm Long x 56.3 Wide x 14-18mm Inside Diameter

Quantity required: 1

Out of Stock. No longer stocked.

3

Camber Caster Adjusting Kit

SPF3227K

This Kit is designed to allow Camber Adjustment on Standard Height & XR Ride Height Vehicles only.

Kit includes:

4 x 1.6mm, 2 x 3mm & 3 x 6mm Shims.

Quantity required: 2

Was £146.04. Now just £73.02 (inc. VAT)

Only 2 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 2 x Brackets

Fitment Difficulty:

Fitting Time: 2hrs

4

Camber Caster Adjusting Kit

SPF5099BK

This Kit is designed to allow Camber Adjustment on Lowered Height & Super Low Ride Height Vehicles only.

Kit includes:

4 x 1.6mm, 2 x 3mm & 4 x 6mm Shims.

Quantity required: 2

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

5

Camber Caster Adjusting Kit

SPF5099K

This Kit is designed to allow Camber Adjustment on Lowered Height & Super Low Ride Height Vehicles only.

Kit includes:

1 x Control Arm Upper-Inner Bush Kit

4 x 1.6mm, 2 x 3mm & 4 x 6mm Shims

Quantity required: 2

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs 30mins

6

Camber Caster Adjusting Shim Kit

SPF1600-1.6SK

1.6 mm shims (10 pack)

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

7

Camber Caster Adjusting Shim Kit

SPF1600-3SK

3mm shims (10 pack)

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

8

Camber Caster Adjusting Shim Kit

SPF1600-6SK

6mm shims (10 pack)

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

9

Control Arm Lower Assembly Kit

TRC1009

Left and Right Replacement Arms for Repair or Performance UpgradeThese arms utilise SuperPro bushings and are manufactured from a high strength, light weight alloy material and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushings, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.

SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

10

Control Arm Lower-Inner Bush Kit

SPF3224K

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.

Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

11

Control Arm Upper Assembly Kit

TRC1008

Left and Right Replacement Arms for Repair or Performance Upgrade
Contains 2 Complete Arms
These arms utilise new material in the bushings and are manufactured from a high strength, light weight alloy material and come complete with a heavy duty ball joint.
By eliminating the voiding of the O.E style rubber bushing; these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
These arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
In a performance lowered application, these arms offer an alternative to the SuperPro Bushings for those seeking control without further compromising the ride quality that normally is associated with lowered springs and firmer shock absorbers.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

12

Control Arm Upper-Inner Bush Kit

SPF3226K

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.

Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 4hrs

13

Radius Arm Assembly Kit

TRC1021

Left and Right Arms for Standard Replacement and Repair UpgradeArms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement
These arms utilise SuperPro bushings and are manufactured from a high strength, light weight alloy material and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushings, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Radius Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.

SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 2hrs

14

Shock Absorber Lower Bush Kit

SPF3225K

Bushing mounted in lower control arm.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

15

Strut Bar To Chassis Mount Bush Kit

SPF3221K

Standard replacement.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

16

Strut Bar To Chassis Mount Bush kit - Double Offset

SPF3223K

Alignment CorrectionA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

17

Strut Bar To Chassis Mount Bush Kit - Single Offset

SPF3222K

Alignment CorrectionUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Was £226.94. Now just £113.47 (inc. VAT)

Only 1 Left In Stock...Hurry!

For immediate despatch.

Buy It Now

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 1 x Instruction Sheet, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 3hrs

18

Strut Top Cap

RS008

Quantity required: 2

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

19

Sway Bar Link

TRC4013

Standard Replacement12mm Ball Joint Link

180 Degree opposed

Length 110 mm center to center

Quantity required: 2

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 30mins

20

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1245L

12mm Ball Joint Adjustable Link

Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits

6060-T5 Alloy Link
Ball for low friction and long life
Spanner provision for on-car adjustment
Eliminates sway bar link flex
Allows for neutral sway bar positioning
Maximises all positions on adjustable Sway Bars
Suits lowered or raised vehicles

SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

21

Sway Bar Mount Bush Kit

SPF3228-29.5K

available Sizes: 29.5, 31, 32, 33 & 37mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

22

Sway Bar Mount Bush Kit

SPF3228-31K

available Sizes: 29.5, 31, 32, 33 & 37mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

23

Sway Bar Mount Bush Kit

SPF3228-32K

available Sizes: 29.5, 31, 32, 33 & 37mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

24

Sway Bar Mount Bush Kit

SPF3228-33K

available Sizes: 29.5, 31, 32, 33 & 37mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

25

Sway Bar Mount Bush Kit

SPF3228-37K

available Sizes: 29.5, 31, 32, 33 & 37mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr

26

22mm Heavy Duty 3 Position Blade Adjustable Sway Bar

RC0083RZ-22

Suits OE Exhaust only; Please check muffler width before purchase; U-bolt needs to be cut down to 115 mm

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

27

Leaf Spring Saddle Mount Bush Kit

SPF0101K

Solid Axle Wagon

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 1hr 30mins

28

Spring Front Eye Bush Kit

SPF1744K

Round style bush, 54mm OD.

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

29

Spring Front Eye Bush Kit

SPF3823K

Performance Option to suit Ute & Cab Chassis, 54mm OD

Quantity required: 1

Out of Stock. No longer stocked.

Fitment Difficulty:

Fitting Time: 3hrs

30

Spring Rear Bush Kit All

SPF2233K

Quantity required: 1

Was £70.74. Now just £35.38 (inc. VAT)

In Stock

For immediate despatch.

Buy It Now

Kit Includes: 8 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr 30mins

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing