×

OR, SELECT YOUR VEHICLE

No Increase in Noise, Vibration or Harshness

Front

1

Control Arm Upper-Inner Bush Kit

A

Standard Use

SPF2014K
suits 4WD Vehicles only
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 4 x Steel Tubes, 4 x Sleeves, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

B

Heavy-Duty Use

SPF2014-95K
suits 4WD Vehicles only
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. 
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

Kit Includes: 4 x Steel Tubes, 4 x Sleeves, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 4hrs
Fitting Time icon

2

Shock Absorber Upper Bush Kit

SPF3757K
2WD Vehicles

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

3

Steering Rack & Pinion Mount Bush Kit

SPF2484K

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 5 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs
Fitting Time icon

4

Anti-Roll Bar Mount Bush Kit

A

To Fit 18mm Bar

SPF0971-18K
2WD. available Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

B

To Fit 19mm Bar

SPF0971-19K
2WD. available Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

C

To Fit 20mm Bar

SPF0971-20K
2WD. available Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 45mins
Fitting Time icon

Rear

5

18mm Heavy Duty 3 Position Blade Adjustable Sway Bar

RC0027RZ-18
SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.

Upgrading to Roll Control Sway Bars will:
  • Improve the stability by compensating for the change in centre of gravity of the chassis
  • Neutralise the factory understeer
  • Increase tyre life
  • Control the roll in load carrying and towing applications
  • Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package

Quantity required: 1

Kit Includes: 1 x Anti-Roll Bar, 1 x Fitting Kit

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

6

Greasable Pin and Bush Kit - Front Eye

SPF4460K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates

7

Greasable Shackle and Bush Kit

KIT0070SK
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings

The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.

Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.

Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.

This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

8

Leaf Spring Bush Kit

A

Leaf Spring Bush Kit - Standard Use

KIT0070K
Kit contains: 1 x SPF0972K, 1 x SPF2231-8K

These bushings are often overlooked when upgrading the suspension of a 4WD.

Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.

It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.

This can be especially noticeable carrying a load or towing a boat or caravan.

The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.

By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs 30mins
Fitting Time icon

B

Leaf Spring Bush Kit - Heavy-Duty Use

KIT0070HK
Kit contains: 1 x SPF0972HK, 1 x SPF2231-8HK

These bushings are often overlooked when upgrading the suspension of a 4WD.

Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.

It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking.

This can be especially noticeable carrying a load or towing a boat or caravan.

The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.

By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!

Quantity required: 1

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 3hrs 30mins
Fitting Time icon

9

Shock Absorber Lower Bush Kit

SPF2178-16K
A=16mm B=24.5mm C=24mm D=36mm E=30mm
Double Tapered Bushing

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

10

Shock Absorber Upper Bush Kit

SPF2178-16K
A=16mm B=24.5mm C=24mm D=36mm E=30mm
Double Tapered Bushing

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 30mins
Fitting Time icon

11

Spring Front Eye Bush Kit

A

Standard Use

SPF0972K

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

B

Heavy-Duty Use

SPF0972HK

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

12

Spring Rear Bush Kit All

SPF2231-8K

Quantity required: 1

Kit Includes: 8 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr 30mins
Fitting Time icon

Contact your nearest Holden specialist

Back to Top