No Increase in Noise, Vibration or Harshness
Camber Adjusting Bolt Kit
SPF4351-14KAdds +/- 1.5 Degrees CamberCamber Bolt Kit 14mm
Quantity required: 1
Out of Stock. No longer stocked.
Control Arm Assembly Kit
TRC1017Standard Replacement.
Includes left and right arms, rear brackets, ball joints and all bushings
These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
Includes left and right arms, rear brackets, ball joints and all bushings
These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:

Fitting Time: 2hrs

Control Arm Lower-Inner Front Bush Kit
SPF4432KQuantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:

Fitting Time: 2hrs

4
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment Kit
SPF3585KStandard replacement
These SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
These SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:

Fitting Time: 3hrs

Steering Pull Correction Kit
SPF3586K0.5 Degree Caster Adjustment available
These bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
These bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:

Fitting Time: 3hrs

Performance Alignment Kit
SPF3587K1 Degree Caster Adjustment available
These SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to enhance the steering feel of the vehicle.
Supplied with two offset bushes, these kits increase the caster or setback by repositioning the ball joints slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and the vehicle will handle and steer with way more precision!
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
These SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to enhance the steering feel of the vehicle.
Supplied with two offset bushes, these kits increase the caster or setback by repositioning the ball joints slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and the vehicle will handle and steer with way more precision!
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:

Fitting Time: 3hrs

Sway Bar Link Kit - Heavy Duty Adjustable
TRC1220012mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:

Fitting Time: 1hr

Control Arm Lower-Outer Bush Kit
SPF3582KLocated In Hub Assy
Quantity required: 1
Was £77.28. Now just £38.64 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:

Fitting Time: 3hrs

Control Arm Upper-Outer Bush Kit
SPF3581KQuantity required: 1
Was £72.83. Now just £36.42 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes
Fitment Difficulty:

Fitting Time: 3hrs
