Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Does your car feel vague or unresponsive in corners?
1
Full Suspension Enhancement Lift Kit
Formula Version
HILUX-022R
Designed to lift the vehicle 40-50mm (depending on load) and provide the ultimate in handling and control, both on and off road.
0-300kg constant load.
Kit includes: 2 x Formula ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Formula dampers & 1 x SuperPro Brake Line Spacer Kit.
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
0-300kg constant load.
Kit includes: 2 x Formula ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Formula dampers & 1 x SuperPro Brake Line Spacer Kit.
- Low-pressure Nitrogen for fade free performance
- Designed and built for Australian conditions
- SuperPro Hybrid bushings on both front struts
- Specifically designed for each application
- Valve coding to suit differing spring rates
- Comfortable yet heavy-duty 4WD Lift Kit
- Big-bore design for improved heat dissipation
- Tapered pegs on front struts for increased strength
- 3 Years/60000km Warranty
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
Quantity required: 1
Out of Stock. No longer stocked.
Bilstein Version
HILUX-020R
Designed to lift the vehicle 40-50mm (depending on load and vehicle specification) and provide the ultimate in handling and control, both on and off road.
0-300kg constant load.
Kit includes: 2 x Bilstein ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Bilstein dampers & 1 x SuperPro Brake Line Spacer Kit.
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
0-300kg constant load.
Kit includes: 2 x Bilstein ReadyStruts with SuperPro top mounts and King Springs taper wire coil springs. 2 x Rear Formula leaf springs with SuperPro bushes with greasable pins/shackle bolts, rear Bilstein dampers & 1 x SuperPro Brake Line Spacer Kit.
- BILSTEIN gas-pressure technology provides maximum traction, precise handling and safety
- Patented digressive valving instantly reacts to changing surface conditions
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Proven in harsh Australian outback conditions
- Repairable & Revalveable
- OEM certified mounting hardware allows for easy installation
- Restores original ride characteristic
- Individually fine-tuned during BILSTEIN road testing
- Enhanced safety
- Precision handling for optimised vehicle control
- Constant damping power under any load
- 3 year / 60,000km warranty
Please note: This kit's default rear spring rate has been specifically designed for use on vehicles that have no constant load. Matching spring rates with your vehicle's weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you require then please contact us to make sure you get the right spring rate.
Quantity required: 1
Out of Stock. No longer stocked.
Easy-Lift Kit
TRC219LK
To be used with standard height suspension only, the SuperPro Easy-Lift kit will lift the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 front strut spacers, 2 rear raising blocks, 4 longer U-bolts and, 2 rear brake line spacers to keep the brake lines safe and secure.
SuperPro Roll Control Easy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Pick-Up and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
Everything that is required has been supplied in each kit, including comprehensive fitting instructions to ensure the right outcome every time.
Kit contains 2 front strut spacers, 2 rear raising blocks, 4 longer U-bolts and, 2 rear brake line spacers to keep the brake lines safe and secure.
SuperPro Roll Control Easy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Pick-Up and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.
Everything that is required has been supplied in each kit, including comprehensive fitting instructions to ensure the right outcome every time.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Strut Top Spacer Kit
TRC008-6
Spacer Sleeve, suspension strut mount.
Raises vehicle approximately 10-12mm.
Raises vehicle approximately 10-12mm.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Wheel-alignment required after fitment
SuperPro Easy-Lift Strut Spacer Kit
TRC096FLK
This kit will lift the front of the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 Front Strut Spacers
Kit contains 2 Front Strut Spacers
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
33mm Heavy Duty 2 Position Blade Adjustable Anti-Roll Bar
RC0081FZ-33
SuperPro Roll Control Front Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Steering Rack & Pinion Mount Bush Kit
SPF4056K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Wheel-alignment required after fitment
Ball Joint Upper Boot Kit
TRC7000RK
Kit includes Boot and Cir Clips for one Control Arm
Quantity required: 2
Was £28.46. Now just £14.23 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 30mins
Control Arm Lower Camber Bolt Kit
TRC0031
Complete set of replacement Camber Bolts
Quantity required: 1
Was £193.08. Now just £96.54 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Bolts, 4 x Nuts, 4 x Washers
Fitment Difficulty:
Fitting Time: 2hrs
9
Control Arm Lower Complete Assembly Kit
Standard Ride Height
TRC475
Left and Right Arms for Standard Replacement and Repair UpgradeComplete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Pins
Fitment Difficulty:
Fitting Time: 1hr 30mins
Offset for Lifted Vehicles
TRC476
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction
0.6 Degrees of Camber Adjustment
Alignment Correction
Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins.
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
0.6 Degrees of Camber Adjustment
Alignment Correction
Complete Camber Adjustable Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins.
The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:
- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
- Camber increase version is ideally suited to a lifted vehicle
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Pins
Fitment Difficulty:
Fitting Time: 1hr 30mins
10
Control Arm Lower-Inner Front Bush Kit
Standard Alignment
SPF5028K
Standard replacement
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Was £249.43. Now just £124.72 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Offset for Lifted Vehicles
SPF5028XK
Alignment Correction
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Quantity required: 1
Was £249.43. Now just £124.72 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
11
Control Arm Lower-Inner Rear Bush Kit
Standard Alignment
SPF5027K
Standard replacement
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Was £253.28. Now just £126.65 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Offset for Lifted Vehicles
SPF5027XK
Alignment Correction
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Camber and Caster Adjustable
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to “tune” the wheel alignment to suit the specific requirements of vehicle and driver.
Quantity required: 1
Was £253.28. Now just £126.65 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs 30mins
12
Control Arm Upper Complete Assembly
Standard Alignment
TRC477
Standard replacement for non-lifted vehicles. Comes complete with standard alignment SuperPro bushes and standard ball joints.
Quantity required: 1
Now just £112.20 (inc. VAT)
Only 4 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Wheel-alignment required after fitment
Fixed Caster and Camber Correction
TRC6470
Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction
Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber.
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement.
The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5?). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm.
Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber.
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement.
The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5?). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
Adjustable Alignment
TRC470
Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degrees of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
These arms deliver up to 3 degrees of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features
- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Arms, 2 x Ball Joints, 4 x Polyurethane Bushes, 4 x Steel Tubes
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
Fixed Offset
TRC6490
These SuperPro Fixed Offset Upper Control Arms are a heavy duty, all-in-one solution for any vehicle that has been lifted 2.5"-3.5". Providing an increase in caster and camber correction along with greatly improved neutral ball joint position and increase
These arms are intended to be used to improve the ball joint position and improve bump steer.
These arms are a Heavy Duty construction with higher articulation Ball joints to suit higher lifts and are fitted with SuperPro Bushes to control unwanted arm movement.
Getting the correct alignment is no longer a problem.
These arms are intended to be used to improve the ball joint position and improve bump steer.
These arms are a Heavy Duty construction with higher articulation Ball joints to suit higher lifts and are fitted with SuperPro Bushes to control unwanted arm movement.
Getting the correct alignment is no longer a problem.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs
Wheel-alignment required after fitment
13
Control Arm Upper-Inner Bush Kit
Standard Alignment
SPF2845K
Standard replacement. Remove original shell for fitment.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 4hrs
Alignment Correction
SPF3230K
Alignment Correction. Camber Adjustable by 0.5 to 1 Degree.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non-tyre-wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non-tyre-wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Was £337.51. Now just £168.76 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 1 x Instruction Sheet, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 4hrs
Differential Drop Kit
TRCHILUXDD
Suits Lifted vehicles.
The kit has been designed in such a way that allows the original bash plate to be refitted.
It is supplied complete with all required spacers, bolts, washers and nuts.
When lifting the 2005-to-current model Hilux 4WD, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV. This wear is accelerated further if larger & wider wheels and tyres are fitted.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
The kit has been designed in such a way that allows the original bash plate to be refitted.
It is supplied complete with all required spacers, bolts, washers and nuts.
When lifting the 2005-to-current model Hilux 4WD, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV. This wear is accelerated further if larger & wider wheels and tyres are fitted.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
ReadyStrut Top Caps
RS002K
Strut Cap, Spring Seat, Nuts & Washers
Quantity required: 1
Out of Stock. No longer stocked.
Shock Absorber Lower Bush Kit
SPF2348PK
Will not fit Koni & EFS Shocks. Utilises superior SuperPro Hybrid material for massive increase in durability in all applications.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs
Anti-Roll Bar Link Kit - Heavy Duty Adjustable
TRC1285L
12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm
Features & Benefits
Minimum Length 140 mm - Maximum Length 170 mm
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates Anti-Roll Bar link flex
- Allows for neutral Anti-Roll Bar positioning
- Maximises all positions on adjustable Anti-Roll Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
18
Anti-Roll Bar Mount Bush Kit
To Fit 32mm Bar
SPF4986-32K
Quantity required: 1
Out of Stock. No longer stocked.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
To Fit 34mm Bar
SPF4986-34K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
18mm Heavy Duty 3 Position Blade Adjustable Anti-Roll Bar
RC0081RZ-18
The Hilux does not come fitted with a rear anti-roll bar as standard and SuperPro have managed to expertly engineer a retro-fit bar which comes supplied with everything you need to fit it.
The resistance to the fitment of rear anti-roll bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement anti-roll bar and link package is designed correctly, it can be fitted with minimal or no loss of articulation.
Upgrading to SuperPro's Roll Control Anti-Roll Bars will:
We highly recommend fitting this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package.
The resistance to the fitment of rear anti-roll bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement anti-roll bar and link package is designed correctly, it can be fitted with minimal or no loss of articulation.
Upgrading to SuperPro's Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
We highly recommend fitting this product with a SuperPro Roll Control Front Anti-Roll Bar to get the complete handling upgrade package.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Brake Line Spacer Kit
SPF4855K
When raising the ride height of your Hilux, the rear brake lines can become stressed due to the extra reach which can lead to damage and even failure. You can fit our Brake Line Spacer Kit which extends the reach of the rear brake lines to account for the extra height, removes stress from the lines and, keeps your vehicle safe and secure.
Quantity required: 1
Was £39.70. Now just £19.85 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Steel Tubes, 4 x Bolts, 8 x Washer(s) - used for Steel and / or Polyurethane
Fitting Time: 30mins
Fixed Pin Protection Cap
SPF4848K
To be used with aftermarket Greaseable Fixed Pins
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Side impact protection for the fuel tank when greaseable pins a fitted from the outside on the LHS of the vehicle
Quantity required: 1
Was £21.66. Now just £10.84 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 1 x Polyurethane Bush
Fitment Difficulty:
Greasable Pin and Bush Kit - Front Eye
SPF4456K
Quantity required: 1
Was £133.39. Now just £66.70 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Plates
23
Leaf Spring Bush Kit
Standard Duty
KIT5157RK
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Heavy-Duty
KIT0096HK
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
Quantity required: 1
Was £120.24. Now just £60.12 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Fitment Difficulty:
Fitting Time: 3hrs 30mins
Spring Front Eye Bush Kit
SPF2670K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Spring Rear Eye Bush Kit
SPF2671K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
Spring Shackle Upper Bush Kit
SPF2672K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr 30mins
SuperPro Easy-Lift Rear Lift Kit
TRC219RLK
This kit is a safe, legal alternative to Extended Shackles. To be used with standard height suspension only.
This kit will lift the rear of the vehicle approx. 45mm and retains the standard suspension.
2 Rear Raising Blocks, 4 U Bolts & Brake Hose Extension Kit.
This kit will lift the rear of the vehicle approx. 45mm and retains the standard suspension.
2 Rear Raising Blocks, 4 U Bolts & Brake Hose Extension Kit.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Wheel-alignment required after fitment