Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
My steering is soo much sharper!
Camber Adjusting Bolt Kit
SPF4351-17K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 17mm
Quantity required: 1
Out of Stock. No longer stocked.
Control Arm Lower-Inner Front Bush Kit
SPF2663K
Re-use original mounting pin
Quantity required: 1
Was £35.33. Now just £17.66 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 3hrs
Control Arm Lower-Inner Rear Bush Kit
SPF3173K
Standard replacement, OEM 4865-06060
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 4hrs
Control Arm Lower-Inner Rear Bush Kit - Double Offset
SPF3175K
Press Steel Arm, 2 x Offset bushing, replaces OEM 4865-06060A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 4hrs
Control Arm Lower-Inner Rear Bush Kit - Single Offset
SPF3174K
Pressed Steel Arm, 1 x Standard & 1 x Offset bushing, replaces OEM 4865-06060Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 4hrs
Steering Rack & Pinion Mount Bush (Power Steering)
SPF2857K
Re-use original strap and crush tube
Quantity required: 1
Was £62.88. Now just £31.44 (inc. VAT)
In Stock
For immediate despatch.
Kit Includes: 3 x Polyurethane Bushes, 1 x Steel Tube
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC10200
10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF1132-17K
Standard Size, Measure Bar Diameter 16, 17, 18, 20, 23, 24 availableavailable Sizes 15, 16, 17, 18, 20, 23 & 24mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 45mins
Camber Adjusting Bolt Kit
SPF4351-15K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm
Quantity required: 1
Out of Stock. No longer stocked.
Sway Bar Link Kit - Heavy Duty Adjustable
TRC10105
10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 160 mm - Maximum Length 205 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF2284-17K
available Sizes 14, 15, 16, 17 & 20mm
Quantity required: 1
Was £31.16. Now just £15.59 (inc. VAT)
Only 1 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF2790-16K
Round Style Mount Bushing.available Sizes 14, 16, 17, 18 & 20mm
Quantity required: 1
Out of Stock. No longer stocked.
Sway Bar Mount Bush Kit
SPF2790-17K
Round Style Mount Bushingavailable Sizes 14, 16, 17, 18 & 20mm
Quantity required: 1
Was £22.73. Now just £11.36 (inc. VAT)
Only 2 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes
Trailing Arm Bush Kit
SPF0823K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 3hrs