×

OR, SELECT YOUR VEHICLE

No Increase in Noise, Vibration or Harshness

Front

1

Camber Adjusting Bolt Kit

SPF4351-12K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

2

Control Arm Lower-Front Bush Kit

SPF1843K

Quantity required: 1

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

3

Control Arm Lower-Rear Bush Kit

SPF1280K
PS & DS standard

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves, 4 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

4

Control Arm Lower-Rear Bush Kit

SPF1282AK
Alignment Correction for Performance

Quantity required: 1

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves, 4 x Washer(s) - used for Steel and / or Polyurethane

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

5

Control Arm Lower-Rear Bush Kit - Double Offset

SPF1282K
Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

Kit Includes: 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

6

Control Arm Lower-Rear Bush Kit - Single Offset

SPF1281K
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Quantity required: 1

Kit Includes: 4 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

7

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1045
10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

Rear

8

Camber Adjusting Bolt Kit

SPF4351-12K
Adds +/- 1.5 Degree CamberCamber Bolt Kit 12mm

Quantity required: 1

Kit Includes: 2 x Bolts

9

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1025
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

10

Sway Bar Link Kit - Heavy Duty Adjustable

TRC1045
10mm Ball Joint Adjustable Link. Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates sway bar link flex
  • Allows for neutral sway bar positioning
  • Maximises all positions on adjustable Sway Bars
  • Suits lowered or raised vehicles
SuperPro Tip - to get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

Kit Includes: 2 x Links

Fitment Difficulty:
Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 1hr
Fitting Time icon

11

Trailing Arm Lower-Rear Bush Kit

SPF0907K
40mm Outside diameter bushing

Quantity required: 1

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

Fitment Difficulty:
Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.

Fitting Time: 2hrs 30mins
Fitting Time icon

Contact your nearest Mazda specialist

Back to Top