Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Tyre Wear
Camber Adjusting Bolt Kit
SPF4351-12K
Adds +/- 1.5 Degrees camberCamber Bolt Kit 12mm
Quantity required: 1
Out of Stock. No longer stocked.
Control Arm Lower-Front Bush Kit
SPF1843K
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Control Arm Lower-Rear Bush Kit
SPF1282AK
Alignment Correction for Performance
Quantity required: 1
Was £201.41. Now just £100.70 (inc. VAT)
Only 3 Left In Stock...Hurry!
For immediate despatch.
Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Control Arm Lower-Rear Bush Kit
SPF1280K
PS & DS standard
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Control Arm Lower-Rear Bush Kit - Double Offset
SPF1282K
Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Control Arm Lower-Rear Bush Kit - Single Offset
SPF1281K
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 2hrs 30mins
Sway Bar Link Kit - Heavy Duty Adjustable
TRC1045
10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr
Sway Bar Mount Bush Kit
SPF0202-20K
available Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 45mins
Sway Bar Mount Bush Kit
SPF0202-25.4K
available Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 45mins
Camber Adjusting Bolt Kit
SPF4351-12KAdds +/- 1.5 Degree CamberCamber Bolt Kit 12mm
Quantity required: 1
Out of Stock. No longer stocked.
Sway Bar Link Kit - Heavy Duty Adjustable
TRC104510mm Ball Joint Adjustable Link. Minimum Length 100 mm - Maximum Length 120 mm
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits
- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
Quantity required: 1
Out of Stock. No longer stocked.
Fitment Difficulty:
Fitting Time: 1hr